Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
HMC OS for p650
- Thread starter AIXFinder
- Start date
sonicstick
MIS
HMC V6R1.1
You need HMC Version 6 Release 1.0 P/N 32N1265, and then update with HMC Update HMC V6R1.1.
At least that's what we did in December 2006.
By now they probably have it all bundled together.
You need HMC Version 6 Release 1.0 P/N 32N1265, and then update with HMC Update HMC V6R1.1.
At least that's what we did in December 2006.
By now they probably have it all bundled together.
And then follow the link "HMC 3.3.7 and lower releases" under the heading "HMC products for Servers with Power 4 Processors"
HTH,
p5wizard
I'm with trisco and p5wizard.
Code levels above 3.3.7 are for power5 systems only.
Your p650 is a power4 as trisco says.
You'll also want to checkout and install the "HMC 3.3.x specific fixes" on the same link to secure your system and get it fully up to date.
Don't forget to check if your HMC needs a firmware update before you do the HMC code update!
Code levels above 3.3.7 are for power5 systems only.
Your p650 is a power4 as trisco says.
You'll also want to checkout and install the "HMC 3.3.x specific fixes" on the same link to secure your system and get it fully up to date.
Don't forget to check if your HMC needs a firmware update before you do the HMC code update!
- Status