Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

history file help!

Status
Not open for further replies.

MartyMar74

Technical User
Oct 5, 2005
31
US
I usually do not print my history file too often but have in the past and it worked just fine. Today I tried to print it in ld 22 and nothing. So I went to ld 17 to see if I can chg it and this is what i got:

SCH5593
History File does not exist; therefore, cannot use the chg or del
command.

So I thought that was strange so I figured I just add a new one. Ld 17 adan new hst. This is what i got:

SCH5592
History File cannot be configured due to no entry available in the I/O
table.

Has anyone dealt with this before? Does anyone have a fix for this? Any help will be greatly appreciated!!!!!
 
In LD 22 do
prt
adan

at ADAN HIST
check that size has a value .
 
It may be that you already have 15 devices built. Please go to LD 22 and REQ PRT Type ADAN. Return till it starts printing all of them. If you have devices 0-15 already built then you'll have to sacrafice something or do without a history file (not recommended). Also if you could post your ISS here that has a bearing too. Newer releases allow for more devices.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top