History dialing

[RCTelecom]

How can I add a 1 to long distance calls when dialing from my history log on a 9608 telephone?

 

[AACon]

Thats weird...the caller id should show a 1 on there on incoming calls.

-Austin
ACE: Implement IP Office

 

[PhoneFixer98]

Most CID I see has 10 digits as well. I find the call in call logs, press my trunk access code (9), dial 1, then push the button next to the number in the call log.

 

[kholladay]

Caller ID would never show a 1 unless perhaps you had SIP trunks and that is how it is being delivered when formatted under E.164. But a PRI and Analog would always show the proper 10-digit number.

http://www.ipofficehelp.com/HOWTO_BypassDial9.aspx

Kyle Holladay / IPOfficeHelp.com
ACSS/ACIS/APSS Avaya SME Communications
APDS Avaya Data
MCP/MCTS Exchange 2007/2010
Adtran ATSA, Aruba ACMA

"Thinking is the hardest work there is, which is the probable reason why so few engage in it." - Henry Ford

 

[piethief]

make it add a 1 in ARS if it is not a local area code, or add a 1 to the prefix on the trunk and strip it for local calls is ARS. It's a pain in the ARS.

Test if dialing a 1 for local works and add it to all incoming will save you some time.