Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations gkittelson on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

HIPATH administrative assistant

Status
Not open for further replies.
Hitcom

Hitcom

Technical User
Sep 3, 2018
15
RS
Hi

When I try to connect to 192.0.2.5 with PC Xp service pack 3 installed after fallowing all 1-6 steps there is problem

in section for managing stations .

Appears small window and CORB error 103

Any advice . I tried complete uninstall JAVA 1.4 and deleting all directories COMWIN HIPATHT ... etc and reinstall .. and nothing helped

Java(TM) Plug-in: Version 1.4.2_06
Using JRE version 1.4.2_06 Java HotSpot(TM) Client VM
User home directory = C:\Documents and Settings\Rade
----------------------------------------------------
c: clear console window
f: finalize objects on finalization queue
g: garbage collect
h: display this help message
l: dump classloader list
m: print memory usage
o: trigger logging
p: reload proxy configuration
q: hide console
r: reload policy configuration
s: dump system properties
t: dump thread list
v: dump thread stack
x: clear classloader cache
0-5: set trace level to <n>
----------------------------------------------------
****************************************

>>>>>>>>> EXCEPTION in constructor call of ImpCmUiAdmin:java.lang.NullPointerException

****************************************

sun.plugin.cache.DownloadException

at sun.plugin.cache.CachedFileLoader.load(Unknown Source)

at sun.plugin.cache.FileCache.get(Unknown Source)

at sun.net. Source)

at sun.net. Source)

at sun.net. Source)

at java.net.HttpURLConnection.getResponseCode(Unknown Source)

at sun.net. Source)

at sun.applet.AppletClassLoader.getBytes(Unknown Source)

at sun.applet.AppletClassLoader.access$100(Unknown Source)

at sun.applet.AppletClassLoader$1.run(Unknown Source)

at java.security.AccessController.doPrivileged(Native Method)

at sun.applet.AppletClassLoader.findClass(Unknown Source)

at java.lang.ClassLoader.loadClass(Unknown Source)

at sun.applet.AppletClassLoader.loadClass(Unknown Source)

at java.lang.ClassLoader.loadClass(Unknown Source)

at org.apache.commons.logging.impl.LogFactoryImpl$1.run(LogFactoryImpl.java:441)

at java.security.AccessController.doPrivileged(Native Method)

at org.apache.commons.logging.impl.LogFactoryImpl.loadClass(LogFactoryImpl.java:435)

at org.apache.commons.logging.impl.LogFactoryImpl.isLog4JAvailable(LogFactoryImpl.java:505)

at org.apache.commons.logging.impl.LogFactoryImpl.getLogClassName(LogFactoryImpl.java:327)

at org.apache.commons.logging.impl.LogFactoryImpl.getLogConstructor(LogFactoryImpl.java:368)

at org.apache.commons.logging.impl.LogFactoryImpl.newInstance(LogFactoryImpl.java:529)

at org.apache.commons.logging.impl.LogFactoryImpl.getInstance(LogFactoryImpl.java:235)

at org.apache.commons.logging.LogFactory.getLog(LogFactory.java:370)

at de.siemens.icn.hipath.unity.as.cm.ui.CmUiClient.<clinit>(CmUiClient.java:127)

at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)

at sun.reflect.NativeConstructorAccessorImpl.newInstance(Unknown Source)

at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(Unknown Source)

at java.lang.reflect.Constructor.newInstance(Unknown Source)

at java.lang.Class.newInstance0(Unknown Source)

at java.lang.Class.newInstance(Unknown Source)

at de.siemens.icn.hipath.unity.as.cache.applet.WrapperAppletHelper.init2(WrapperAppletHelper.java:963)

at de.siemens.icn.hipath.unity.as.cache.applet.WrapperAppletHelper.access$500(WrapperAppletHelper.java:68)

at de.siemens.icn.hipath.unity.as.cache.applet.WrapperAppletHelper$2.finished(WrapperAppletHelper.java:756)

at de.siemens.icn.hipath.unity.as.cache.manager.SetVersionInfos$3.run(SetVersionInfos.java:196)

at java.awt.event.InvocationEvent.dispatch(Unknown Source)

at java.awt.EventQueue.dispatchEvent(Unknown Source)

at java.awt.EventDispatchThread.pumpOneEventForHierarchy(Unknown Source)

at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)

at java.awt.EventDispatchThread.pumpEvents(Unknown Source)

at java.awt.EventDispatchThread.pumpEvents(Unknown Source)

at java.awt.EventDispatchThread.run(Unknown Source)

sun.plugin.cache.DownloadException

at sun.plugin.cache.CachedFileLoader.load(Unknown Source)

at sun.plugin.cache.FileCache.get(Unknown Source)

at sun.net. Source)

at sun.net. Source)

at sun.net. Source)

at java.net.HttpURLConnection.getResponseCode(Unknown Source)

at sun.net. Source)

at sun.applet.AppletClassLoader.getBytes(Unknown Source)

at sun.applet.AppletClassLoader.access$100(Unknown Source)

at sun.applet.AppletClassLoader$1.run(Unknown Source)

at java.security.AccessController.doPrivileged(Native Method)

at sun.applet.AppletClassLoader.findClass(Unknown Source)

at java.lang.ClassLoader.loadClass(Unknown Source)

at sun.applet.AppletClassLoader.loadClass(Unknown Source)

at java.lang.ClassLoader.loadClass(Unknown Source)

at org.apache.commons.logging.impl.LogFactoryImpl$1.run(LogFactoryImpl.java:441)

at java.security.AccessController.doPrivileged(Native Method)

at org.apache.commons.logging.impl.LogFactoryImpl.loadClass(LogFactoryImpl.java:435)

at org.apache.commons.logging.impl.LogFactoryImpl.isLog4JAvailable(LogFactoryImpl.java:506)

at org.apache.commons.logging.impl.LogFactoryImpl.getLogClassName(LogFactoryImpl.java:327)

at org.apache.commons.logging.impl.LogFactoryImpl.getLogConstructor(LogFactoryImpl.java:368)

at org.apache.commons.logging.impl.LogFactoryImpl.newInstance(LogFactoryImpl.java:529)

at org.apache.commons.logging.impl.LogFactoryImpl.getInstance(LogFactoryImpl.java:235)

at org.apache.commons.logging.LogFactory.getLog(LogFactory.java:370)

at de.siemens.icn.hipath.unity.as.cm.ui.CmUiClient.<clinit>(CmUiClient.java:127)

at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)

at sun.reflect.NativeConstructorAccessorImpl.newInstance(Unknown Source)

at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(Unknown Source)

at java.lang.reflect.Constructor.newInstance(Unknown Source)

at java.lang.Class.newInstance0(Unknown Source)

at java.lang.Class.newInstance(Unknown Source)

at de.siemens.icn.hipath.unity.as.cache.applet.WrapperAppletHelper.init2(WrapperAppletHelper.java:963)

at de.siemens.icn.hipath.unity.as.cache.applet.WrapperAppletHelper.access$500(WrapperAppletHelper.java:68)

at de.siemens.icn.hipath.unity.as.cache.applet.WrapperAppletHelper$2.finished(WrapperAppletHelper.java:756)

at de.siemens.icn.hipath.unity.as.cache.manager.SetVersionInfos$3.run(SetVersionInfos.java:196)

at java.awt.event.InvocationEvent.dispatch(Unknown Source)

at java.awt.EventQueue.dispatchEvent(Unknown Source)

at java.awt.EventDispatchThread.pumpOneEventForHierarchy(Unknown Source)

at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)

at java.awt.EventDispatchThread.pumpEvents(Unknown Source)

at java.awt.EventDispatchThread.pumpEvents(Unknown Source)

at java.awt.EventDispatchThread.run(Unknown Source)

sun.plugin.cache.DownloadException

at sun.plugin.cache.CachedFileLoader.load(Unknown Source)

at sun.plugin.cache.FileCache.get(Unknown Source)

at sun.net. Source)

at sun.net. Source)

at sun.net. Source)

at java.net.HttpURLConnection.getResponseCode(Unknown Source)

at sun.net. Source)

at sun.applet.AppletClassLoader.getBytes(Unknown Source)

at sun.applet.AppletClassLoader.access$100(Unknown Source)

at sun.applet.AppletClassLoader$1.run(Unknown Source)

at java.security.AccessController.doPrivileged(Native Method)

at sun.applet.AppletClassLoader.findClass(Unknown Source)

at java.lang.ClassLoader.loadClass(Unknown Source)

at sun.applet.AppletClassLoader.loadClass(Unknown Source)

at java.lang.ClassLoader.loadClass(Unknown Source)

at org.apache.commons.logging.impl.LogFactoryImpl$1.run(LogFactoryImpl.java:441)

at java.security.AccessController.doPrivileged(Native Method)

at org.apache.commons.logging.impl.LogFactoryImpl.loadClass(LogFactoryImpl.java:435)

at org.apache.commons.logging.impl.LogFactoryImpl.getLogConstructor(LogFactoryImpl.java:376)

at org.apache.commons.logging.impl.LogFactoryImpl.newInstance(LogFactoryImpl.java:529)

at org.apache.commons.logging.impl.LogFactoryImpl.getInstance(LogFactoryImpl.java:235)

at org.apache.commons.logging.LogFactory.getLog(LogFactory.java:370)

at de.siemens.icn.hipath.unity.as.cm.ui.CmUiClient.<clinit>(CmUiClient.java:127)

at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)

at sun.reflect.NativeConstructorAccessorImpl.newInstance(Unknown Source)

at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(Unknown Source)

at java.lang.reflect.Constructor.newInstance(Unknown Source)

at java.lang.Class.newInstance0(Unknown Source)

at java.lang.Class.newInstance(Unknown Source)

at de.siemens.icn.hipath.unity.as.cache.applet.WrapperAppletHelper.init2(WrapperAppletHelper.java:963)

at de.siemens.icn.hipath.unity.as.cache.applet.WrapperAppletHelper.access$500(WrapperAppletHelper.java:68)

at de.siemens.icn.hipath.unity.as.cache.applet.WrapperAppletHelper$2.finished(WrapperAppletHelper.java:756)

at de.siemens.icn.hipath.unity.as.cache.manager.SetVersionInfos$3.run(SetVersionInfos.java:196)

at java.awt.event.InvocationEvent.dispatch(Unknown Source)

at java.awt.EventQueue.dispatchEvent(Unknown Source)

at java.awt.EventDispatchThread.pumpOneEventForHierarchy(Unknown Source)

at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)

at java.awt.EventDispatchThread.pumpEvents(Unknown Source)

at java.awt.EventDispatchThread.pumpEvents(Unknown Source)

at java.awt.EventDispatchThread.run(Unknown Source)


------------Log4j properties configuration------------

For custom and local configuration of logging utility
you need to put Log4j properties file named
'log4j.properties'
in 'C:\Documents and Settings\Rade' directory and reinitiate cm
(refresh, open some other window, re-logon, ...).

If you are using AppletCache Manager you can find it in
'{path_to_AppletCache_dir}\{server_version}\common\properties' subdirectory.
If you are not using AppletCache Manager you can find it at
your server in '/opt/unity/htdocs/common/properties/' directory.
After you copy it you need to edit it (instructions are
included in the file as comments).

For more info read the configuration file first.


Local property file found. --> Log4J is running with local property file (C:\Documents and Settings\Rade\log4j.properties) now.



-----------------------------------------


SECM_WARNING: readUserData: unknown data type: key=Verify Data=null

SECM_WARNING: readUserData: unknown data type: key=SearchVerify Data=null

SECM_WARNING: readUserData: unknown data type: key=MaxHits Data=null

SECM_WARNING: readUserData: unknown data type: key=Sort Data=null

SECM_WARNING: readUserData: unknown data type: key=AmoLang Data=null

SECM_WARNING: readUserData: unknown data type: key=Cm9 Data=null

CorbaUtl - Config-IOR Error, file: https192.0.2.5/common/iors/cm_subadm/HdmsDataBag.properties

CorbaUtl - Config-IOR Error, IpServer=192.0.2.5

CorbaUtl - Config-IOR error e=java.util.MissingResourceException: Can't find resource for bundle java.util.PropertyResourceBundle, key 192.0.2.5

****************************************

>>>>>>>>> EXCEPTION in constructor call of ImpCmUiAdmin:java.lang.NullPointerException

****************************************
 
Sort by date Sort by votes
Try it on the Customer LAN IP, not the internal 192 IP. Corba error is noromal for CM on the ATLAN (not supported) on older 4K. Think it works on the newer OS4K but you mention java 1.4 so I guess you are old software.
 
Upvote 0 Downvote
Complete the 'Client Preparation' on the landing page of 192.0.2.5
You need a specific Java version for each HiPath version.
It may assist to use a VM - Virtual XP Machine - for connection to the HiPath if you use the connection a lot
 
Upvote 0 Downvote
Moriendi
Thanks for tip.
PC with Windows 7 is running virtual XP and it is connected to customer Ethernet plug ( nearest to diodes )
So problem is in where Ethernet is connected? Not in first but in last plug should be plugged .
We will try tomorrow.
This HIPATH
switch is some old left over after migration to SIP CISCO equipment and we made virtual X machine too figure out can be usable for something ...

Sbcsu
Here I have found some Tip advising to delete all older Java ... so because of that we have install Virtual XP clean.
Only Java from HIPATH landing page STEP 2 ...
 
Upvote 0 Downvote
1. For the Customer LAN port the default IP address is "192.1.2.5" after Unix installation and
you can change this from UW7 / UBA.
2. The Service LAN port makes the access to the Atlantic LAN. A connection to the ADP
(RMX) can be produced by means of the IP 192.0.2.3 and the IP 192.0.2.5 can be accessed
the HiPath 4000 V2.0 Assistant and by means of (on the full scale) with the Internet Explorer.
3. The IPDA LAN port is only required when IP distributed architecture is added.
4. The ATLANTIC LAN port is designed for the connection to the WAML/HG3550V2.0 board
or for any connection of an application Server.


We have connected our PC to port 1. but it should be connected to port 2. ?
 
Upvote 0 Downvote
192.1.2.5 is the default for Customer LAN, but if it's been installed a while, maybe it was changed.

Only CM gave the Corba error on the ATLAN, other apps like UBA worked as normal, so you can still use UBA to find the Customer IP when connected to 192.0.2 LAN.

Not sure where you are connecting, if you attach a picture it will be clearer.
 
Upvote 0 Downvote
Hi Moriendi

We connected PC to circled Ethernet port , but as I understood it should be connected on square input

connect_veaxu9.jpg
 
Upvote 0 Downvote
Circle is for the Customer LAN. Default is 192.1.2.5 for customer IP but it may have been changed already to something on your customer network.

Square input ("Service") is for the internal ATLAN, 192.0.2.0 network.

You can look for the configured customer IP either by browsing to 192.0.2.5 on Service port and looking at LAN config in UBA, or putty to 192.0.2.5 (telnet or ssh, depending on how old your software is), and using ifconfig command.
 
Upvote 0 Downvote
Hi

Apologies for pause in answer. I have tried both ETH ports and nowhere is Assistant working .
To be precise first half on MENU in Assistant is working but when We have try to see BOARDS STATION ..etc. CORBA error appears

We have tried FOX instead of explorer but it is same .

If it in some help here are two JPG files and in addition TXT file where JAVA reports problem.

We wonder if is problem with certificate since certificate is referring to "EN Software and product release " and https: is 192.0.2.5

FF_odxpoj.jpg

mismatch_tuait2.jpg



Apologies for our lack of knowledge of this old TDM system. [bigsmile]

 
 https://files.engineering.com/getfile.aspx?folder=c4944c75-369d-4e15-90a3-7fdded3a3567&file=HdmsDataBag[1].properties
Upvote 0 Downvote
You may need to restart the CM processes

From telnet/shh to Assistant

cs_control stop
cs_control start

Then try cm from customer lan
 
Upvote 0 Downvote
--------------------------------------------------------------------------------
Connection opened to: 192.0.2.5 2018-09-06 09:11:09
--------------------------------------------------------------------------------
L01: LOGON ACCEPTED TSN 0264 ALLOCATED 18-10-07 09:02:28
<
M1: KEIN KOMMANDO GEFUNDEN
HicomLanguage=German
<ABFRAGEN-VEGAS:LIST=KURZ,HWMOD=SWU&ADS;
ABFRAGEN-VEGAS:LIST=KURZ,HWMOD=SWU&ADS;
H500: AMO VEGAS GESTARTET
ANLAGEN-NUMMER AMO AMO-TEXT-APS-NR START ANWENDER STATUS
SWU: L31900Q2201A00001 REGEN P30252B4500B00105 21.01.15 09:34 NESD FERTIG
ADS: L31900Q2201A00001 REGEN P30252B4500A00105 21.01.15 09:36 NESD FERTIG

AMO-VEGAS-111 VERWALTUNG DER GENERIERUNGSABLAEUFE AUF DEM SUPPORT-RECHNER
ABFRAGEN DURCHGEFUEHRT;
HicomVariant=UV3.0-SA05

<M1: KEIN KOMMANDO GEFUNDEN
<CHANGE-FUNCT:SLANG=ENG;
CHANGE-FUNCT:SLANG=ENG;
H500: AMO FUNCT GESTARTET

AMO-FUNCT-111 SYSTEM SWITCHES
CHANGE COMPLETED;
Switched HicomLanguage to English
 
Upvote 0 Downvote
Is in upper command print version of Hipath visable ?





 
Upvote 0 Downvote
And this is result of proposed commands

Unfortunatelz no effect

# cs_control stop


##### STOPPING of CM processes #####
##### Stopping of dbwrite ...
# Stopping of dbwrite successful

##### Stopping of dbwNotifHandler ...
# Stopping of dbwNotifHandler successful

##### Stopping of cnonserver ...
# Stopping of cnonserver successful

##### Stopping of uxbproc ...
# Stopping of uxbproc successful

##### Stopping of ldbsync ...
# Stopping of ldbsync successful

##### Stopping of SoapServer ...
# Stopping of SoapServer successful

##### Stopping of uxsstrup ...
# Stopping of uxsstrup successful

##### Stopping of ccs ...
# Stopping of ccs successful

##### Stopping of UM-proxy ...
# Stopping of UM-proxy successful

##### Phonebook Server Application ...
# Stopping of Phonebook Server Application successful

##### Phonebook Persistency ...
# Stopping of Phonebook Persistency successful

##### Stopping of cserver ...
# Stopping of cserver successful

##### Process checks ...

Information about the Process Status:
- Registered: Daemon registered but never started, or
daemon terminated per application request.
- Active: The daemon was started and is still up and running.
- Inactive: The daemon started too often and was not restarted by ProcM.

Status will be retrieved .....
cmproc_cserver Registered Sun Oct 7 09:18:59 2018 cm_subadm
cmproc_uxbproc Registered Sun Oct 7 09:18:56 2018 cm_subadm
cmproc_umproc Registered Sat Oct 6 11:39:15 2018 cm_subadm
cmproc_ldbsync Registered Sun Oct 7 09:18:57 2018 cm_subadm
cmproc_dbwrite Registered Sun Oct 7 09:18:56 2018 cm_subadm
cmproc_dbwNotifHandler Registered Sun Oct 7 09:18:56 2018 cm_subadm
cmproc_cnonserver Registered Sun Oct 7 09:18:56 2018 cm_subadm
cmproc_uxsstrup Registered Sun Oct 7 09:18:57 2018 cm_subadm
cmproc_ccs Registered Sun Oct 7 09:18:58 2018 cm_subadm
cmproc_soapserver Registered Sun Oct 7 09:18:57 2018 cm_subadm
cmproc_cmipsa Registered Sat Oct 6 11:37:45 2018 cm_subadm
cmproc_cmipbp Registered Sat Oct 6 11:37:45 2018 cm_subadm


# cs_control start


##### STARTING of CM processes #####

##### Number of active processes: 0
##### Number of processes to control: 12

##### Start Mailbox Initialization Process #####
##### Initialization of Mailbox Communication successful #####
##### Start CM processes via procadmin #####


##### Activate cserver
# Activation of cserver successful

##### Activate UM-proxy
# Activation of UM-proxy successful

##### Activate dbwrite
# Activation of dbwrite successful

##### Activate dbwNotifHandler
# Activation of dbwNotifHandler successful

##### Activate cnonserver
# Activation of cnonserver successful

##### Activate uxbproc
# Activation of uxbproc successful

##### Activate ldbsync
# Activation of ldbsync successful

##### Activate SoapServer
# Activation of SoapServer successful

##### Activate uxsstrup
# Activation of uxsstrup successful

##### Activate ccs
# Activation of ccs successful

##### Activate Phonebook Server Application
# Activation of Phonebook Server Application successful

##### Activate Phonebook Persistency
# Activation of Phonebook Persistency successful

##### Process activation finished.
##### Please wait 60 seconds for process checks ...

Information about the Process Status:
- Registered: Daemon registered but never started, or
daemon terminated per application request.
- Active: The daemon was started and is still up and running.
- Inactive: The daemon started too often and was not restarted by ProcM.

Status will be retrieved .....
cmproc_cserver Active Sun Oct 7 09:19:50 2018 cm_subadm 5855
cmproc_uxbproc Active Sun Oct 7 09:20:13 2018 cm_subadm 6230
cmproc_umproc Registered Sun Oct 7 09:19:59 2018 cm_subadm
cmproc_ldbsync Active Sun Oct 7 09:20:22 2018 cm_subadm 6272
cmproc_dbwrite Starting Sun Oct 7 09:19:50 2018 cm_subadm 6018
cmproc_dbwNotifHandler Active Sun Oct 7 09:20:04 2018 cm_subadm 6104
cmproc_cnonserver Active Sun Oct 7 09:20:10 2018 cm_subadm 6187
cmproc_uxsstrup Active Sun Oct 7 09:20:29 2018 cm_subadm 6434
cmproc_ccs Starting Sun Oct 7 09:20:29 2018 cm_subadm 6478
cmproc_soapserver Active Sun Oct 7 09:20:25 2018 cm_subadm 6391
cmproc_cmipsa ReadyToRun Sun Oct 7 09:19:50 2018 cm_subadm
cmproc_cmipbp ReadyToRun Sun Oct 7 09:19:50 2018 cm_subadm

##### Number of Process Starts since last manually Process Stop / Start #####
##### Last Start was at: Sun Oct 7 09:19:17 GMT 2018
##### Current date/time: Sun Oct 7 09:20:34 GMT 2018
----- dbwrite: 1
----- dbwNotifHandler: 1
----- cserver: 1
----- UM-proxy: 0
----- cmipsa: 0
----- cmipbp: 0
----- cnonserver: 1
----- uxbproc: 1
----- ldbsync: 1
----- SoapServer: 0
----- uxsstrup: 1
----- ccs: 1
##### START processing ended.
 
Upvote 0 Downvote
Have you run through the client preparation steps to install ACM, the certificates etc.
 
Upvote 0 Downvote
OK, the board you showed runs up to V5 as far as I know. For V5 I believe you need to have at least Java V6 on the Oracle website when you go to get Java there are some links on the bottom that allow you to access older versions of Java, but one side note is that you cannot complete the Client Preparation if you don't have a supported version of Java, so if the setup did complete with all steps showing green/OK, including installing the Java certificate on your PC, and the Applet Cache Manager, then you must have a supported Java version... If you are on V4 or V3 I don't know what Java version it needs because I started at V5.

I will also comment that I have had NO success with communications and switch management using virtual XP on Windows 7 because it seems like it doesn't have full access to the various communications ports. I found it better to just do all the client prep right in Windows 7 and be done with it. It IS possible to have multiple versions of Java installed and functioning on a PC, but you will get whiny warnings about security issues when using the older versions, plus you also need to have a browser new enough to be compatible with the software, and I am not sure if IE6 or IE8 or whatever is the highest that runs on XP is. I think I had to go to Windows 7 when I started working with the 4000.

Also, if you are going to access the system through the 192.1.2.x IP addresses then your PC has to be assigned a 192.1.2.x IP address (I would suggest 192.1.2.100 because some of those lower addresses are used internally to the system), appropriate subnet mask to match the system, and default gateway.

You might already know a bunch of that, but I didn't think it would hurt to go over it. :)

Don Bruechert, Voice Comm Analyst II
CareTech Solutions @ Holy Family Memorial
Manitowoc, WI, USA
 
Upvote 0 Downvote
Hi Don

To be honest we have tried JAVA 6 downloaded from FILE HIPPO but it was problem on Windows 7
since Explorer 9 have problem with Active X control. Explorer was jamming ...

Anyway .. we will try again Java 6. but tomorrow .. if some other job does not pop up

Yust one more info. Admin Assistant is version 3.o

Thanks for time and advice's ...[thumbsup]

 
Upvote 0 Downvote
Hi

We have tried Java 6 . And there is no more error 103.

Now is error 108 .

Mazbe Assistant is not possible tu use so we will use CIM WIN

Java Plug-in 1.6.0_34
Using JRE version 1.6.0_34-b04 Java HotSpot(TM) Client VM
User home directory = C:\Documents and Settings\Rade
----------------------------------------------------
c: clear console window
f: finalize objects on finalization queue
g: garbage collect
h: display this help message
l: dump classloader list
m: print memory usage
o: trigger logging
q: hide console
r: reload policy configuration
s: dump system and deployment properties
t: dump thread list
v: dump thread stack
x: clear classloader cache
0-5: set trace level to <n>
----------------------------------------------------


Check Properties...
log4j:WARN Caught Exception while in Loader.getResource. This may be innocuous.
java.lang.reflect.InvocationTargetException
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
at java.lang.reflect.Method.invoke(Unknown Source)
at org.apache.log4j.helpers.Loader.getTCL(Loader.java:154)
at org.apache.log4j.helpers.Loader.getResource(Loader.java:92)
at org.apache.log4j.LogManager.<clinit>(LogManager.java:103)
at org.apache.log4j.Logger.getLogger(Logger.java:104)
at org.apache.commons.logging.impl.Log4JLogger.getLogger(Log4JLogger.java:229)
at org.apache.commons.logging.impl.Log4JLogger.<init>(Log4JLogger.java:65)
at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
at sun.reflect.NativeConstructorAccessorImpl.newInstance(Unknown Source)
at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(Unknown Source)
at java.lang.reflect.Constructor.newInstance(Unknown Source)
at org.apache.commons.logging.impl.LogFactoryImpl.newInstance(LogFactoryImpl.java:529)
at org.apache.commons.logging.impl.LogFactoryImpl.getInstance(LogFactoryImpl.java:235)
at org.apache.commons.logging.LogFactory.getLog(LogFactory.java:370)
at de.siemens.icn.hipath.unity.as.cm.ui.CmUiClient.<clinit>(CmUiClient.java:127)
at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
at sun.reflect.NativeConstructorAccessorImpl.newInstance(Unknown Source)
at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(Unknown Source)
at java.lang.reflect.Constructor.newInstance(Unknown Source)
at java.lang.Class.newInstance0(Unknown Source)
at java.lang.Class.newInstance(Unknown Source)
at de.siemens.icn.hipath.unity.as.cache.applet.WrapperAppletHelper.init2(WrapperAppletHelper.java:963)
at de.siemens.icn.hipath.unity.as.cache.applet.WrapperAppletHelper.access$500(WrapperAppletHelper.java:68)
at de.siemens.icn.hipath.unity.as.cache.applet.WrapperAppletHelper$2.finished(WrapperAppletHelper.java:756)
at de.siemens.icn.hipath.unity.as.cache.manager.SetVersionInfos$3.run(SetVersionInfos.java:196)
at java.awt.event.InvocationEvent.dispatch(Unknown Source)
at java.awt.EventQueue.dispatchEventImpl(Unknown Source)
at java.awt.EventQueue.access$000(Unknown Source)
at java.awt.EventQueue$1.run(Unknown Source)
at java.awt.EventQueue$1.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at java.security.AccessControlContext$1.doIntersectionPrivilege(Unknown Source)
at java.awt.EventQueue.dispatchEvent(Unknown Source)
at java.awt.EventDispatchThread.pumpOneEventForFilters(Unknown Source)
at java.awt.EventDispatchThread.pumpEventsForFilter(Unknown Source)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
at java.awt.EventDispatchThread.run(Unknown Source)
Caused by: java.security.AccessControlException: access denied (java.lang.RuntimePermission getClassLoader)
at java.security.AccessControlContext.checkPermission(Unknown Source)
at java.security.AccessController.checkPermission(Unknown Source)
at java.lang.SecurityManager.checkPermission(Unknown Source)
at java.lang.Thread.getContextClassLoader(Unknown Source)
... 42 more
log4j:WARN Caught Exception while in Loader.getResource. This may be innocuous.
java.lang.reflect.InvocationTargetException
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
at java.lang.reflect.Method.invoke(Unknown Source)
at org.apache.log4j.helpers.Loader.getTCL(Loader.java:154)
at org.apache.log4j.helpers.Loader.getResource(Loader.java:92)
at org.apache.log4j.LogManager.<clinit>(LogManager.java:105)
at org.apache.log4j.Logger.getLogger(Logger.java:104)
at org.apache.commons.logging.impl.Log4JLogger.getLogger(Log4JLogger.java:229)
at org.apache.commons.logging.impl.Log4JLogger.<init>(Log4JLogger.java:65)
at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
at sun.reflect.NativeConstructorAccessorImpl.newInstance(Unknown Source)
at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(Unknown Source)
at java.lang.reflect.Constructor.newInstance(Unknown Source)
at org.apache.commons.logging.impl.LogFactoryImpl.newInstance(LogFactoryImpl.java:529)
at org.apache.commons.logging.impl.LogFactoryImpl.getInstance(LogFactoryImpl.java:235)
at org.apache.commons.logging.LogFactory.getLog(LogFactory.java:370)
at de.siemens.icn.hipath.unity.as.cm.ui.CmUiClient.<clinit>(CmUiClient.java:127)
at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
at sun.reflect.NativeConstructorAccessorImpl.newInstance(Unknown Source)
at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(Unknown Source)
at java.lang.reflect.Constructor.newInstance(Unknown Source)
at java.lang.Class.newInstance0(Unknown Source)
at java.lang.Class.newInstance(Unknown Source)
at de.siemens.icn.hipath.unity.as.cache.applet.WrapperAppletHelper.init2(WrapperAppletHelper.java:963)
at de.siemens.icn.hipath.unity.as.cache.applet.WrapperAppletHelper.access$500(WrapperAppletHelper.java:68)
at de.siemens.icn.hipath.unity.as.cache.applet.WrapperAppletHelper$2.finished(WrapperAppletHelper.java:756)
at de.siemens.icn.hipath.unity.as.cache.manager.SetVersionInfos$3.run(SetVersionInfos.java:196)
at java.awt.event.InvocationEvent.dispatch(Unknown Source)
at java.awt.EventQueue.dispatchEventImpl(Unknown Source)
at java.awt.EventQueue.access$000(Unknown Source)
at java.awt.EventQueue$1.run(Unknown Source)
at java.awt.EventQueue$1.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at java.security.AccessControlContext$1.doIntersectionPrivilege(Unknown Source)
at java.awt.EventQueue.dispatchEvent(Unknown Source)
at java.awt.EventDispatchThread.pumpOneEventForFilters(Unknown Source)
at java.awt.EventDispatchThread.pumpEventsForFilter(Unknown Source)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
at java.awt.EventDispatchThread.run(Unknown Source)
Caused by: java.security.AccessControlException: access denied (java.lang.RuntimePermission getClassLoader)
at java.security.AccessControlContext.checkPermission(Unknown Source)
at java.security.AccessController.checkPermission(Unknown Source)
at java.lang.SecurityManager.checkPermission(Unknown Source)
at java.lang.Thread.getContextClassLoader(Unknown Source)
... 42 more
log4j:WARN No appenders could be found for logger (de.siemens.icn.hipath.unity.as.cm.ui.CmUiClient).
log4j:WARN Please initialize the log4j system properly.
Default log directory (user.home) can not be found!

Local property file not found. --> Log4J is running with server property file.


-----------------------------------------

Exception in thread "Thread-13" java.lang.NullPointerException
at javax.swing.ImageIcon.<init>(Unknown Source)
at de.siemens.icn.hipath.unity.as.general.components.BaseCtrlStartupDlg$StartupDlgTask.<init>(BaseCtrlStartupDlg.java:205)
at de.siemens.icn.hipath.unity.as.general.components.BaseCtrlStartupDlg$1.construct(BaseCtrlStartupDlg.java:152)
at de.siemens.icn.hipath.unity.as.general.components.SwingWorker$2.run(SwingWorker.java:112)
at java.lang.Thread.run(Unknown Source)
FATAL-ERROR: CodedValue-File did NOT exist
 
 https://files.engineering.com/getfile.aspx?folder=ae107fa0-4aa7-4ce5-811c-825d66fb42f3&file=108_Error.jpg
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

@
  • Locked
  • Question
Hipath 4000 V8
Replies
1
Views
276
Moriendi
Moriendi
Ahmed Saber
  • Locked
  • Question
Hipath 3800
Replies
1
Views
252
Lexzie
Lexzie
Steggos
  • Locked
  • Question
Hipath 4000 v5 transfer from auto attendant
Replies
6
Views
365
Moriendi
Moriendi
G
  • Locked
  • Question
HiPath 4000 V6 SIP/SNMP radio
Replies
0
Views
327
glorence
G
B
  • Locked
  • Question
Hipath 4000 V5 signon and signoff
Replies
3
Views
551
sbcsu
sbcsu

Part and Inventory Search

Sponsor

Back
Top