Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Hipath 4000 V2 IP Trunk to CUCM 9.1

Status
Not open for further replies.
veilside

veilside

Technical User
Mar 19, 2010
42
DE
Hello,

Please can I connect Hipath 4000 V2 to Cisco call manager as Hipath 4000 v2 not support SIP trunking, I am already have STMI Card. how I configure the PB with examples please.

 
Sort by date Sort by votes
SIP protocol was introduced with HiPath 4000 V3; therefore any IP Trunk connection between HiPath 4000 V2 and Cisco Call Manager would require H.323 protocol - and I doubt that will be an option.

However, there are alternative connections. See the Cisco Interoperability Portal:

You may need to replace the STMI with a TMDNH or DIU2U to support a limited connection.



Good Luck!
 
Upvote 0 Downvote
please check is there a E1 port is available in CCM.
Most of the older version of the HICOM/HIPATH I connected through E1.
Thanks
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

G
  • Locked
  • Question
HiPath 4000 V6 SIP/SNMP radio
Replies
0
Views
251
glorence
G
B
  • Locked
  • Question
Hipath 4000 V5 signon and signoff
Replies
3
Views
421
sbcsu
sbcsu
Ahm_mah
  • Locked
  • Question
Hipath 4000 suffix numbers
Replies
0
Views
145
Ahm_mah
Ahm_mah
wanyin
  • Locked
  • Question
hipath 4000 v5 assitant crash
Replies
1
Views
232
Moriendi
Moriendi
illios
  • Locked
  • Question
hd and mo problem hipath 4000
Replies
1
Views
204
Moriendi
Moriendi

Part and Inventory Search

Sponsor

Back
Top