In order to mass-delete a lot of stations configured on my lab-system I plan to do a regen, edit out all the stuff I want to remove and finally gendb it.
To test the procedure, I did the following:
[ul]
[li]Deleted the VEGAS file and performed a complete REGEN[/li]
[li]Deleted the SWU database: ae-dbc:resswudb=j; and reloaded[/li]
[li]Reload stopped at an error on the 7-segment led: [1] (I assume this means no SWU database found)[/li]
[li]Deleted the VEGAS file again and ran sta-gendb:"as:/Lxxx/yyy/RE/ALL","TKfan",SWU;[/li]
[li]And finally did another reload[/li]
[/ul]
The system came up with the same error display [1] as before.
What else do I have to do to activate the newly generated database? The manuals is a bit brief on that...
To test the procedure, I did the following:
[ul]
[li]Deleted the VEGAS file and performed a complete REGEN[/li]
[li]Deleted the SWU database: ae-dbc:resswudb=j; and reloaded[/li]
[li]Reload stopped at an error on the 7-segment led: [1] (I assume this means no SWU database found)[/li]
[li]Deleted the VEGAS file again and ran sta-gendb:"as:/Lxxx/yyy/RE/ALL","TKfan",SWU;[/li]
[li]And finally did another reload[/li]
[/ul]
The system came up with the same error display [1] as before.
What else do I have to do to activate the newly generated database? The manuals is a bit brief on that...
Code:
[1] Error message:
| |
_|.