Hipath 4000 Connection Problem 1

[yllipolar]

Hello i have a problem with hipath 4000 i can not find the ip to connect with it. Before happens this i had a problem with power supply i change it the problem is that now i can not connect to make changes on the system and the strange is that everything is working i just can not log on with my user. I tried to connect with other ports that are there the problem is that i do not have user or password to connect with the other 3 ports. I just want to reset it or to find a solution how can fix this problem.

Thnx

 

[sbcsu]

Hi,
Plug in to bottom row Atlantic or Service
Use IP address 192.0.2.101 255.255.255.0 on your laptop
Connect to 192.0.2.3 using Comwin program

 

[yllipolar]

hello sbcsu thnx for answer but my problem is that is not taking any user log in i tryed with rsta and pass Siemens2000 at atlantic port and it accept this user but it asks me to put new pass because that one was old so i added the default pass that i had for normal user engr that is hipath4000* and now when it tries to log in it stacks the internet explorer just keep loading but never comes up now i am again in the begin i can not connect do you have any idea pls (i am trying to use comwin without any success so i connected from serial port but i don't know hot to reset pass none of the users is working)
thnx again

 

[yllipolar]

i forgot to tell you that is hipath 4000 v2 i have also all the things ok Java and internet explorer and win xp everything is ok from the pc

 

[sbcsu]

http://192.0.2.5

The Unixware 7 default password is Siemens2000
If you have to put that password in it means that the Unixware has re-installed

Comwin to 192.0.2.3
Usernames and Passwords are added on installation.