Hipath 400 IP trunk to Cisco

[veilside]

Hello All,

I am configured an IP trunking to Cisco call manager from HiPath 4000, on Hipath 4000 I have three digits extensions and on Cisco Call manager 4 digits extensions all started with 7XXX so I configured my LDP on hipath as "7"-"XXX" the problem is Hipath send only the last 3 digits and ignore 7 .

 

[sbcsu]

Display the LDPLN
Then Display the relevant LDAT
Then Display the LODR that the LDAT is using
You will have to change the LDAT to
something like
echo,1
echo,2
end

 

[veilside]

Many Thanks for your reply, I have another question can I mask the incoming calls from CUCM to the Hipath 4000 to hide some digits front of incoming calls

Ex; on Hipath 400 Phone display the incoming call displayed as " 7070431" I need to hide 7070 to display as 431 only . is it possible ?

 

[sbcsu]

Use KNMAT to remove display digits on the incoming calls