hipath 3000 +HG1500 + asterisk

[memmas]

Hello,

I have a working system with native trunk between HG1500 and asterisk, the only problem I'm facing is that when I page from asterisk extensions to siemens I get anonymous number instead of the extension or the numbers I forward.

Due to my previous issue with DID numbers on HG1500 I tried to set them up on asterisk and tried to forward them to hipath welcome message and it works but I don't see the numbers of the caller, I still see anonymous.

Is there a setting on hipath for callerID settings from asterisk.

I would like to mention that calls and page from extensions between asterisk phones are working and I can see who's calling, the problem exists on analog stations and voip phones that connect to hipath and calls that are forward from asterisk to siemens hipath only.
Calls that are forward from hipath to asterisk are visible too.

thanks
memmas

 

[Harikt]

Hi
Can you post the Hg1500 configuration .
I have similar problem with one way communication from asterisk to hipath only.
Thanking you
Hari

 

[memmas]

There aren't much settings on HG1500
On trunk type you should choose "Native SIP" and the important part is to disable "Alive TCP monitoring" on pbx/node
On node/1 create a rule for instance if you want to dial asterisk extensions 100, 101, 102 type rule 1xx
if you have other extensions like 200 or 300 you should create more nodes with appropriate rules e.g. 2xx 3xx

Which part doesn't work for you..?