highpath 3800 and openscape biz

[states100]

good day .i want to lint 3800 and openscape biz using the E1, i was asking if this is POSSIBLE AND HOW TO DO IT.
REGARDS

 

[chatcha-ins]

Hi States100
it's possible. I do this solution already. You need S2M License for H3800 and Networking License for OSBiz.

 

[states100]

ook thanks chacha., let me tell you my situation, i have 3800 and its full expanded,so the client need more digital and analogue extentions,so i want to link with X3 openscape pbx so the extentions on the X3 can also use to trunks on 3800 to call out and receive calls.,can you tell me exactly how tou did this.,and what is S2M License., regards

 

[chatcha-ins]

Hi State100
OK Got it , then please follow below question first
1. Did H3800 System has DIUN Card / if not , this is the big problem because you can not order new s2m Licenses to use for E1 Link.
2. If you can not order S2M License , try to use S0 trunk by STMD3 card both H3800 and OSBiz X8 , STMD3 on H3800 no need license ( I'm not sure but can check for you)
3. Why don't you chose X8 insteed X3, X3 is lower TDM capacity . OK for X3 you got 8 Digital port and 4 Analoque port but in the future is not enough , I think.


chatcha

 

[states100]

Thank you for the help.