Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

High Exec CPU/DoS

Status
Not open for further replies.

rasoft

MIS
Jul 1, 2005
6
GB
Why could a router have 6 separate exec processes running using 90% CPU.

Its seems to relate to 6 tty connections.

What are tty connections?

It seems to be causing the internet connection to fail.

Serial interface and proto are still up.

could this be Dos?
 
Do a show users and see who is causing this , and if possible clear these lines .
 
Could be a hacking attempt, at least that's what it would seem, as you have 6 TTY's open, chewing up proc time.

Set up an ACL to block Telnet to your TTY lines

- stephan
 
Hello there, can you paste in here the output of show mem sum only the first 3 lines and sho proc cpu? Also, it will be a good idea to clear the counters and capture a show int to see if any of your interfaces has lots of activities....
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top