HIEDP what to do with this???

[CIF]

When i give the command HIMDP i get the following message:


TIME DATE ERROR CODE
08:45:56 26JAN04 H'13
FAULTY POINTER
LOGICAL PROGRAM ERROR ADDRESS = 020136D0
ENTER
SWSW A-LEVEL SIGNAL CRADRRELEASE (H'0036)
FROM SLP60 (H'37B) EXE A IN LIM 026
TO SLP60 (H'37B) EXE A IN LIM 026
NUMBER OF DATA BYTES IN SIGNAL = 3
WITH 0 1 2 3 4 5 6 7 8 9
000 00 0B 00
STACK ADDRESS = 0205D720
SIGNAL SEND ADDRESS = 02060BE4

Th explanation for the error code in ALEX is very insufficient.

What is the problem with this?? B-(

 

[mdfan]

This info is meant for Damovo/Ericsson personell who has access to the sourcecodes (PLEXVIEW) .

 

[CIF]

Ok. But can you point me into a certain direction with this?
After restart fo the slp60 program unit the eroors were gone but i want to know the source of it.

Greetings Andy

 

[Assar]

The problem is that the channelpointer in SL60 for some reason not is set when the cross address function is ongoing. Happens mostly when using 2B+D signaling.
There is a fix for this that was released already in SP9 (BC11), so time to update ;-)