Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Hide internal display of Directory Number

Status
Not open for further replies.

cgangadeen

Technical User
Jun 23, 2007
30
GB
Can someone help me how to configure CCM so that when one will call an internal IP user only the name will be displayed but not the number.

Alternatively we can hide the real number to be displayed but another phantom number is displayed.
 
Can you explain more- perhaps you can set up a translation and use the " tick mask of handset" or words to that effect but do not enter a local external mask onthe actual handset ?

If all your extensions begin with 3xxx then create a Partiton called "masked" and copy your normal CSS but remove your normal internal partition and replace it with the new one- masked. Then create a new translation of 3xxx and assign the masked Partition it it as well. Then assign the new CSS to the extension you are working then. If it works then all calls by this extension will use the translation of 3xxx but it is forced to use it own mask of "blank"
 
Thanks iptuser. I will test it and let you know.

Thanks again for the tip.

Regards.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top