customer ask the telco to hide the calling and called PRI numbers on incoming and out going ( no CNI) . the question is why the incoming dialed numbers are appear on CDR but on attendant console just the trunk ACOD and the member are appear ?? is there somthing to do on our CS100E rls 5.5 or it is a telco issue ? and if it is a telco why all incming dialed number are shown in CDR ? ??
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Hide CNI
- Thread starter NAVIP99
- Start date
To turn off Calling Number info in CDR, enter CLID=NO in the LD17 PARM.
To print it, do this:
LD 22
REQ PRT
TYPE PARM
Look for the CLID prompt - if it says YES, then CLID appears on CDR. So, change it to NO and it will not appear on CDR any more.
--
Nortel Resources at GHTROUT.com | Connect with me on LinkedIn
--
To print it, do this:
LD 22
REQ PRT
TYPE PARM
Look for the CLID prompt - if it says YES, then CLID appears on CDR. So, change it to NO and it will not appear on CDR any more.
--
Nortel Resources at GHTROUT.com | Connect with me on LinkedIn
--
- Thread starter
- #3
Thanks GHTROUT ,dose the CS1000E able to clatify or show these hidden digits when the caller ( to 2250 operator console ) has this feature from GSM operator ???
the CLID IS yes , and as I Said befor the CDR capture these digits , but on the console or phone sets just the ACOD and the root member is show ???
the CLID IS yes , and as I Said befor the CDR capture these digits , but on the console or phone sets just the ACOD and the root member is show ???
Print out this
LD 21
REQ PRT
TYPE ATT
Look for OPT - the choices XDP and IDP are related to what is shown in the display on the 2250.
To show all digits, enter IDP - to hide all digits, enter XDP
--
Nortel Resources at GHTROUT.com | Connect with me on LinkedIn
--
LD 21
REQ PRT
TYPE ATT
Look for OPT - the choices XDP and IDP are related to what is shown in the display on the 2250.
To show all digits, enter IDP - to hide all digits, enter XDP
--
Nortel Resources at GHTROUT.com | Connect with me on LinkedIn
--
- Thread starter
- #5
The PBX cannot "unhide" a caller that has blocked their Caller ID.
--
Nortel Resources at GHTROUT.com | Connect with me on LinkedIn
--
--
Nortel Resources at GHTROUT.com | Connect with me on LinkedIn
--
- Thread starter
- #7
There is not a way for the Nortel PBX to unhide Caller ID that is blocked.
However, the Caller ID does still exist in the data stream sent to the PBX. The PBX is told to hide it, and I know of no way to get around that. That is my understanding.
--
Nortel Resources at GHTROUT.com | Connect with me on LinkedIn
--
However, the Caller ID does still exist in the data stream sent to the PBX. The PBX is told to hide it, and I know of no way to get around that. That is my understanding.
--
Nortel Resources at GHTROUT.com | Connect with me on LinkedIn
--
- Thread starter
- #9
- Status
Similar threads
- Locked
- Question