i have seen this on both sides always reporting the standby ltuce cable as defective for the flex shelves and only those shelves, which are connected via hg3800(s). this pbx switches over each week and always reports the other side in hista. no complaints from users, no errors in sdsu, tsl.reloaded flex shelves, problem persists.any thoughts ? reload hg3800(s)?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations IamaSherpa on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
hicom 300h 9006.6.1g with f5906 ltuc error
- Thread starter techinu
- Start date
Iamnothere
Technical User
In the ALFE manual there is no suggested course of action for a F5906 - Standby LTUC error. Could be anything. Personally I would wait until a failure occurs - when the technology is THAT old. If you reload the HG3800s, they might never come back up!
- Status