Hicom 300 SA

[RonnieDio1]

<del-SA:TYPE=STN,CD=8189,SVC=VCE,STNO=8189;
DEL-SA:TYPE=STN,CD=8189,SVC=VCE,STNO=8189;
H500: AMO SA STARTED
F28: THE MASTER-STN 8189 CANNOT BE DELETED FROM THE HUNTING GROUP
STNO =

Not delete SA group

 

[sbcsu]

Looks like you are trying to delete the main number of the hunt group only.
You can delete the hunt group entirely or delete individual extensions from the hunt group but if you try and delete the main hunt
group number and leave the rest it will not know what to do.
Best to delete the hunt group fully then add back in what you want.
REG-SA:8189;
DELETE-SA:TYPE=HT,CD=8199,SVC=VCE;

 

[RonnieDio1]

Thanks

worked very well

 

[RonnieDio1]

Just missing the PABX can synchronize with the date and time of Susy Linux.

 

[sbcsu]

You have to do that in YaST on the Suse
Set your time server there.
If you have problems let me know and I will look it up

 

[RonnieDio1]

yast does not enable change data even as root

 

[sbcsu]

Starting with HiPath 4000 V6 the time server of the Assistant is not to be used anymore. The configuration must be done in Linux.
Therefore change to the menu NTP-Client via Yast or search with the name 'NTP' with the search function.
Start the program with a mouse click.
Change from 'only Manually' to 'now and on boot' and click the button 'add'
select 'server' and confirm with next,
add the IP address of the NTP server that is for your area/territory and click the button 'test'
If you get 'server is reachable and responds properly' then click 'ok'
If you get any other response then the system cannot reach the NTP server IP address that you have supplied.
Save all your settings with 'ok'
Then you have to reboot the DSCXL2 primary server by typing the following command from the terminal 'reboot'
then init5
If it is a dual processor you have to do this on both sides.

 

[RonnieDio1]

Thanks

Is resolved SBCSU...