HiCom 300 exchange ID 2

[ekhtel]

I'm not used to working with the HiCom breed, however I have a challenge!

In the world of the HiPath/Realitis, the system parameter SPEID would set the exchange ID, and this would prefix the extension number across the DPNSS network with the exchange ID. Is there a similar setting on the HiCom 300?

 

[sbcsu]

Yes its call a node number on the HiPath/Hicom
DIS-ZAND:ALLDATA;
you will see the node number there.
More configurations are required for to get a DPNSS link working between HiPath and iSDX/Realitis but it does work, also Pickup groups etc. will work.

 

[donb01]

ZAND = SYSDA on the Hicom 300 for the US. SYSDA does not have an ALLDATA parameter. PREFIX might be one, or DATAGEN might also hold a clue as well. I don't think those criteria are set on my system.

I know there was a place for it on the Hicom 150.....

 

[ekhtel]

Brilliant, Many thanks for your help sbcsu and donb01 I'll check this out.