I have a HiCom 150e V1 where I program via the db25 plug on the program card. No login needed and the password is 1. How can I change this password for the direct connect program? Also when programming with a telephone on port 1, the pw is 31994. How do I change this password also? Thanks
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Chris Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
HiCom 150e V1 password change
- Thread starter LWS48
- Start date
You could try to login with *95 then arrow > (so don't login with 31994) Or you could try to use 2 instead of 1 
___________________________________________
It works! Now if only I could remember what I did...
Dain Bramaged
___________________________________________
___________________________________________
It works! Now if only I could remember what I did...
Dain Bramaged
___________________________________________
- Status