HiCom 150 Gigaset wireless handsets

[PKS111]

Hi All.
I am new to the PBX scene and I hope for some help along the way.

I have been asked to manage a number of sites that have the 3750 and 3550 PBX. Through my trawling through the internet, I have found HiPath Manager E v7.3, and have been able to de-register and re-register the handset using the software - using laptop to serial port on the CBMOD card in conjunction with the handset.
Can this be done using the admin phone without the software?
This is can be done with the ARIA 130C with the 350/400/and 450s.

Thanks
Peter

 

[donb01]

On a Hicom 150, on the admin phone (optiset memory), you can dial *95 to get setup, and then 31994 and 31994, which will give you the config menu. I don't know if that option is on there.

You are stating the 3750 and 3550 - a lot of the programming with Manager E is the same, but I do not know if you can do station programming this way.

 

[PKS111]

Thanks.
I had a look in *95 but could not see anything relating to DECT handsets. I was hoping to be able to talk site through dereg and reg them. Looks like i'll have to do part of the job remotely via software, and talk them through the hand set procedure, or go to site and login through Manager E, and do it myself.
Thanks for commenting.