Hicom 150 E linked to Hipath 4000 with PRI

[veilside]

Dears,

as I mentioned in the subject I have two sites with Hipath 4000 V2 and Hicom 150E linked to each other with E1 PRI, with "ADC Campus . RS" HDSL modems devices, because as you know the Hicom 150E not support VOIP gateway, when the two sites already connected with two Cisco 2921 Catalyst, the problem now we need to replace the HDSL "ADC Campus .RS" modems by a new technology is there is a soulotion to link the Hipath 4000 with Hicom 150E over the cisco network ? if not, so what is the new replacement for these modems ?

excuse me as English is my second language.

Thanks for your support.

 

[admfaah1009]

u can search for a device that convert DMC media connection instead of PRI . but first you have to check with pbx vendor for compatibility with the new device

 

[donb01]

I think it's the HG-1500 card for the 150 that gives it networking capabilities, but I don't know what all those capabilities are, and I don't know if you will find someone who will still set it up, because I believe that technology requires a License that Unify/Siemens is not going to give you.