hi what reasons the following alar

[masoud12]

hi
what reasons the following alarms in md110?

CLASS: 4
22 FAULTY GROUP SWITCH MODULE
DATE TIME ALP NOIF GSSIDE GSM
28JUL12 11:19:08 4 1 0 0

CLASS: 3
55 PARITY ERROR IN GROUP SWITCH
DATE TIME ALP NOIF GSSIDE GSM
28JUL12 11:17:39 2 1 0 0

24 FAULTY PCM-LINK (GJU)
DATE TIME ALP NOIF GSSIDE GSM
28JUL12 11:18:09 3 1 0 0

85 BUFFER TRANSFER HAS FAILED
DATE TIME ALP NOIF UNIT EQU BRDID INF1 INF2 INF3
12AUG12 18:58:48 33 1 INR 002-1-23-00 29 40 2 1

25 SYNCHRONIZATION FAULT IN SEVERAL LIM'S
DATE TIME ALP NOIF GSSIDE
13AUG12 03:08:53 5 122 0

Also I've found the following errors with command GJLSP:

GJLSPRINT=FAULTY;
GROUP JUNCTOR LINE STATUS
EQU = 1-0-00-0 GS-MULT 0-0 MCCL
GS SIDE 0 ACTIVE NOT ACTIVATED NOT SIGNALLING CLOCK CONTROL
SIDE 0 ALARM 0010 0000 1100 0001


EQU = 1-1-00-0 GS-MULT 0-1
GS SIDE 0 ACTIVE ACTIVATED SIGNALLING NO CLOCK CONTROL
SIDE 0 ALARM 0000 1010 1110 0110


EQU = 2-0-00-0 GS-MULT 0-2 RCCL
GS SIDE 0 ACTIVE ACTIVATED NOT SIGNALLING CLOCK CONTROL
SIDE 0 ALARM 0010 0000 1100 0011


EQU = 2-1-00-0 GS-MULT 0-3
GS SIDE 0 ACTIVE ACTIVATED SIGNALLING SYNC RECEIVING
SIDE 0 ALARM 0000 1010 1100 0110


EQU = 3-0-00-0 GS-MULT 0-4 ACCL
GS SIDE 0 ACTIVE NOT ACTIVATED NOT SIGNALLING CLOCK CONTROL
SIDE 0 ALARM 0010 0010 1101 0011


EQU = 3-1-00-0 GS-MULT 0-5
GS SIDE 0 ACTIVE ACTIVATED SIGNALLING SYNC RECEIVING
SIDE 0 ALARM 0000 1010 1110 0110.

I search a lot of thread but did not find a specific solution. so how can remove alarms?

 

[sia30]

shoma bayad aval gjul4 ra stop konid bad link gsm side ro restart konid agar dorost nashod group switch ro pak konid va dobare besazid dar sorate edmae alarm ya kart gjul4 kharab shode va ya niaz be upgrade firmware dare @goodarzi

 

[sia30]

cyber_city64@yahoo.com

 

[Satellite1900]

Print
- ILLSP;
- GJLSPRINT=ALL;
- SCICP;
- SCEXP;

WHAT BRINGS THE DISPLAY OF GSU ON THE GS?
CHECK THE CARD THAT ALL OF GS HAS WORKING AND ARE CONNECTED PROPERLY.

\Satellite1900

 

[masoud12]

hi Satellite1900

ILLSP;
COMMAND UNKNOWN
<GJLSPRINT=ALL;
GROUP JUNCTOR LINE STATUS
EQU = 1-0-00-0 GS-MULT 0-0 MCCL
GS SIDE 0 ACTIVE NOT ACTIVATED NOT SIGNALLING CLOCK CONTROL
SIDE 0 ALARM 0010 0000 1100 0001


EQU = 1-1-00-0 GS-MULT 0-1
GS SIDE 0 ACTIVE ACTIVATED SIGNALLING NO CLOCK CONTROL
SIDE 0 ALARM 0000 1010 1110 0110


EQU = 2-0-00-0 GS-MULT 0-2 RCCL
GS SIDE 0 ACTIVE NOT ACTIVATED NOT SIGNALLING CLOCK CONTROL
SIDE 0 ALARM 0010 0000 1100 0011


EQU = 2-1-00-0 GS-MULT 0-3
GS SIDE 0 ACTIVE ACTIVATED SIGNALLING SYNC RECEIVING
SIDE 0 ALARM 0000 1010 1110 0110


EQU = 3-0-00-0 GS-MULT 0-4 ACCL
GS SIDE 0 ACTIVE NOT ACTIVATED NOT SIGNALLING CLOCK CONTROL
SIDE 0 ALARM 0010 0000 1101 0011


EQU = 3-1-00-0 GS-MULT 0-5
GS SIDE 0 ACTIVE ACTIVATED SIGNALLING SYNC RECEIVING
SIDE 0 ALARM 0000 1010 1110 0110



END
SCICP;
MASTER LIM/GSM CONFIGURATION DATA
MASTER 2ND MASTER 3RD
LIM GSM LIM GSM LIM
0 2 3
END

<SCEXP;
EXTERNAL SYNC RECEIVING LINES DATA
SPAREMASTER LIM STATUS
FIRST CHOICE 1-1-50-0 SYNC RECEIVING
SECOND CHOICE NOT PRESENT
THIRD CHOICE NOT PRESENT

END

<

 

[Satellite1900]

Hi,Masoud
sorry I misspelled:
ILSSP;
print command again SCICP edited properly,
The GCU2 what it says? What code has the display?

\Satellite1900

 

[masoud12]

ENTER PASSWORD
<
AUTHORITY CLASS 5

(C) COPYRIGHT ERICSSON


ZANJAN 20OCT12 10:29:00 1-0-23-02

<SCICP;
MASTER LIM/GSM CONFIGURATION DATA
MASTER 2ND MASTER 3RD
LIM GSM LIM GSM LIM
0 2 3
END

<ILSSP;
COMMAND UNKNOWN

 

[Satellite1900]

How many times must I tell you to tell me what appears on GCU2?
what version do you have? Print CADAP
The parameters of the SCICP you can put as it should? The anomalous values ​​are read in that way.
You want to solve the problem or not?

\Satellite1900