Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

hi next time i will integrate tw

Status
Not open for further replies.

Tosu

Technical User
Jun 10, 2015
87
ID
hi

next time i will integrate two pbx. they are osbiz x8 with Hicom-300E.
the connection used an IP-Gateway.
is it possible connection like the configure on the attche file.
the Gateway will be convert SIP trunk/ sip extension to E1 isdn PRA. see configure on the attach file.

which can do realise connection with 2 figure plan.
that figure -1, figure -2 or both can do it.

and how the configure in osbiz


 
 https://files.engineering.com/getfile.aspx?folder=c0b24d71-e5f9-4fc3-9f4e-964d24b1d4b1&file=20220116_222648.jpg
Config-1 is what you need.
Not used an osbiz but would need to create a route for the digit ranges on Hicom to send calls to the gateway.
Similarly need to configure LCR on Hicom to send calls to osbiz. (Could also do this through WABE once a route is configured.)
 
in config-1, i need to integrate 2 pbx have been mension before. others ways to connection the pabx,osbiz with hicom.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top