Hi
I just bought a 1900c switch from someone else.
I am having trouble communicate with the console port on the switch.
I am using a cisco rollover cable and a 9 pin terminal adapter, I connect one end to the com port on my computer and the other end to the console port on the switch, which is also using another 9 pin terminal adapter as well. I have verified the wiring on the rollover cable where pin 1 on one end is pin 8 on the other end of the cable.
I have used this adapters on other cisco routers and they work.
Cisco switch does power up.
I open up hyper terminal and set the com port for 9600-8-1 and none.
I try using VT100 and ANSI but I can't get it to communication with the console port on the 1900c.
Cay you tell me if I am doing the right steps, using the right adapters, and if there is any thing else I can do.
I am not to familiar with the 1900c switch
thanks,
Mario
I just bought a 1900c switch from someone else.
I am having trouble communicate with the console port on the switch.
I am using a cisco rollover cable and a 9 pin terminal adapter, I connect one end to the com port on my computer and the other end to the console port on the switch, which is also using another 9 pin terminal adapter as well. I have verified the wiring on the rollover cable where pin 1 on one end is pin 8 on the other end of the cable.
I have used this adapters on other cisco routers and they work.
Cisco switch does power up.
I open up hyper terminal and set the com port for 9600-8-1 and none.
I try using VT100 and ANSI but I can't get it to communication with the console port on the 1900c.
Cay you tell me if I am doing the right steps, using the right adapters, and if there is any thing else I can do.
I am not to familiar with the 1900c switch
thanks,
Mario