Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

HI I HAVE OP. 61C RLS 23.55 AND

Status
Not open for further replies.

jftg73

Technical User
Aug 7, 2003
200
0
0
MX
HI

I HAVE OP. 61C RLS 23.55 AND I GET AN ERROR BERR705 AT THE MOMENT TO BACKUP THIS MESSAGE IS REFERENCED TO SOME MEMORY CARD HAVE TROUBLE OR CAN TO BE ANOTHER THING.

THIS IS THE MESSAGEVL000
>LD 43

EDD000


.EDD


BERR705 EXC 0: Address Error in Task "tSL1" (0x879b630)
SR=0x3000, PC=0x41d0ff8, Addr=0x41d0b1c, SSW=0x2d14

DB SEQ NUM = 1440
CONFIG
BERR705 EXC 0: Address Error in Task "tSL1" (0x879b630)
SR=0x3000, PC=0x41d0ff8, Addr=0x41d0b1c, SSW=0x2d14

PHYSICAL MAP
BCS TEMPLATE
PBX TEMPLATE
CUST
ACUST
CLID
ROUTE
LTN TN
LTN LNK
TN
CIOD157 INFO: CMDU 0 is ACTIVE, RDUN is ENABLED

SCL
ESN 00
NCTL
AUTH 00
FRL
NFCR TREES
ASNCH
BG-TIME
BG-CAT
ARIES
SYSP
XPEC
XTDT
BTDT
FTC
MCAD
FCAD
FDCT
DTI2
FFC
LAPW
MFCI
MFCO
TIME
CPND
CPND NM
GPHT
SPECIFIC DATA
HI
ALARM_MGT
CHECKING

RECORD COUNT = 0110
DATADUMP COMPLETE

Starting database backup
to floppy diskette on CMDU 0
KEYCODE
DIRECTORY
CONFIG
DATA
HI
Database backup Complete!

.
EDD000


.
TEMU129 BackUP process ended successfully.
Number of floppy diskette(s) used: 1
Amount of space remaining on the last floppy: 1306

PLS CAN YOU ASSIST ME TO CAN THAT IS MESSAGE. THAMKS.

 
Question: do you use i2004 phones as agents and Supervisors?
If so, test the following: Does this message appear whenever a sup tries to observe one of the i2004 agents?
 
Never mind, you have release 23.55, I overlooked....
 
supernn:

i don't have i2004 phones only i use 2006, 2616 and 500 phones. And this message shown ago 1 week.
 
Well, doesn't look good !

Does the BUSERRor happens every time you're perfoming EDD ?

If so, it looks to me, that a patch is missing !
 
crayburn:

everytime that my pbx make the backup with edd . shown it the error message
 
It could be dangerous but try "edd clr" which clears errors during an edd. Just be careful
 
You have a Bus Error and need to talk to a Nortel Programmer to determin the actual meaning for this Software Input/Output System Message.

Good Luck,

LACITY-Tech
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top