Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Hi, I have configured an IS3000 (C

Status
Not open for further replies.

Asterixx

Technical User
Feb 19, 2018
21
RO
Hi,
I have configured an IS3000 (CCS) Sopho to forward an external trunk:
- I configured a trunk to ring to a specific number - with chplex
- i forwarded this number to an external (mobile) number
- when i call the number from inside the forwarding works
- when i call the the trunk ( witch is directed to this number) the number forwarding don't works.

Thanks a lot !!
 
have an look at the route or bundle option as I recall there was something with TRANSIT
but .... some years ago..... so not 100% sure anymore

can be an OPTION as well....


 
Dear All Helpers

Sorry for bothering you

i'm a new @ NEC-Sopho
I've NEC-SV9100 connected to Sopho iS3000 using 2xPRI GCD-PTRA 4 wire Tied Line Trunk with 60 B-Channel
NEC-SV9100 has internal extensions of 4xxx and the Sopho has Analog Extensions [1xxx, 2xxx, 3xxx, and 5xxx] also has 34 PSTN Lines
when i dial from 4444 to 1602 the call established but when i tried to call from 1602 to 4444 i got busy tone coz there is no route configured for 4xxx on Sopho
how can i configure Sopho to know the IP Phone extensions on NEC-SV9100

i need OM command for this

also i need the IP Phones to dial 9 trunk access code on NEC then the NEC-SV9100 directly pickup any of the 34 PSTN lines on Sopho so i can establish external call from NEC IP Phones
i configure ARS and F-Route on NEC but when i dial 9 i hear another tone then i dial any mobile number i got on my NEC IP Phone Screen Line 001 then i hear silence only

i need OM command for this

Regards,
Ahmad
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top