HI, I am trying to configure Me

[actbala]

HI,

I am trying to configure MedPro card TN 2302 in my PBX G3si. After configure the MedPro card am getting the following result.

test board 01b16

TEST RESULTS

Port Maintenance Name Alt. Name Test No. Result Error Code

01B16 IPMEDPRO 52 PASS
01B16 IPMEDPRO 1371 PASS
01B16 IPMEDPRO 1383 PASS
01B16 IPMEDPRO 1379 FAIL 2805
01B16 IPMEDPRO 1406 PASS
01B1601 MEDPROPT 1407 PASS
01B1602 MEDPROPT 1407 PASS
01B1603 MEDPROPT 1407 PASS
01B1604 MEDPROPT 1407 PASS
01B1605 MEDPROPT 1407 PASS
01B1606 MEDPROPT 1407 PASS
01B1607 MEDPROPT 1407 PASS
01B1608 MEDPROPT 1407 PASS

Any technical tips to fix this issue. And it would be grealty appericiated.

 

[Speewah]

Test 1379 is the Ping test, error 2805:
The number of pings received did not match the number sent (normally one ping sent). This means that no ping responses were received from
the gateway defined on the ip-interface form for the IP Media Processor.
So it appears to be a network issue.