Hi how to resolve the security issu

[Harry0077]

Hi how to resolve the security issue on MFIM50a, did try the different browser and older versions of the browser but no luck,
I can ping the IP address

 

[nfcphoneman]

In PGM 160, try turning off TLS. You may have to change the web server to port 80 in PGM 161.

http://www.jacksonvilletelephone.com

Jacksonville Florida Telephone Systems

 

[Thermus]

You could use a serial cable. Access brandy and enter "web tls 0"

Then try to access IPECs via

HTTP://xxx.xxx.xxx.xxx:443

 

[martinhodge]

as above just turn tls for web off .

you can either talk some one through on the master handset to do it.

or if you have control of the router .

point port 5003 at the system and then just telnet into the system

2. Start a Telnet session ussing putty etc and the port 5003 on telnet .
3. Press enter – you should get this prompt:-
iPECS-50 System
Version MFIM/AU93M-E.5Gj DEC/11
Checksum: 0
DATE: 01/11/12
TIME: 09:51:33
SITE NAME :
You are on TCP1
ENTER PASSWORD:
4. Type the password “jannie”, and press enter to acces maint> mode,:-

To turn off TLS to assist accessing some older systems: maint> web tls off

 

[Harry0077]

Thanks guys , it worked.

 

[martinhodge]

glad we could help

 

[Harry0077]

Thanks guys for helping with previous question,
Can some help me with the Konftel 300IP and UCP 100 system.
I did try to connect the konftel with UCP 100 Konftel won’t get registered on network