Hi how to resolve the security issue on MFIM50a, did try the different browser and older versions of the browser but no luck,
I can ping the IP address
you can either talk some one through on the master handset to do it.
or if you have control of the router .
point port 5003 at the system and then just telnet into the system
2. Start a Telnet session ussing putty etc and the port 5003 on telnet .
3. Press enter – you should get this prompt:-
iPECS-50 System
Version MFIM/AU93M-E.5Gj DEC/11
Checksum: 0
DATE: 01/11/12
TIME: 09:51:33
SITE NAME :
You are on TCP1
ENTER PASSWORD:
4. Type the password “jannie”, and press enter to acces maint> mode,:-
To turn off TLS to assist accessing some older systems: maint> web tls off
Thanks guys for helping with previous question,
Can some help me with the Konftel 300IP and UCP 100 system.
I did try to connect the konftel with UCP 100 Konftel won’t get registered on network
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.