hi guys can anyone tell me whether

[sirjoe njiru]

hi guys can anyone tell me whether it is possible to install avaya j129 phones in avaya s8800 server with a software version of communication manager version 5 (CM5)?

 

[TelephonyNEWB187]

If your hardware can handle this software, you should be able to use them together (from

https://downloads.avaya.com/css/P8/documents/101053967

- ).
So you would need to upgrade your CM to 6.3.6 or later.



=====

Software prerequisites
Ensure that your network already has the following components installed and configured:
• Avaya Aura®
Session Manager 6.3.8 or later
• Avaya Aura®
Communication Manager 6.3.6 or later
• Avaya Aura®
System Manager 6.3.8 or later
• If applicable, Avaya Aura®
Presence Services 6.2.4 or later
• If applicable, Avaya Aura®
Session Border Controller 7.0 or later
• If applicable, IP Office IPO 11.0.0 or later
• A DHCP server for providing dynamic IP addresses to the Avaya J100 Series IP Phones.
• A file server, an HTTP, HTTPS, or the Avaya Aura®
Utility Services for downloading the
software distribution package and the settings file
IPv6 deployment requires Avaya Aura®
Session Manager v7.1 or later, Avaya Aura®
Communication Manager v7.1 or later, Avaya Aura®
System Manager v7.1 or later, and Avaya
Aura®
Session Border Controller v7.1 or later. For more information about installing and
configuring the components, see their respective documentation.



also of note:
• IPv6 : On Avaya J100 Series IP Phones series phones, IPv6 is enabled by default. If your
network does not support IPv6, you can disable IPv6 by setting the IPV6STAT to 0 in the
46xxsettings.txt file.