Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Hi, Everyone I working on Siemens

Status
Not open for further replies.

Ramesh Lal

Technical User
Feb 6, 2022
1
IN
Hi, Everyone
I working on Siemens Hipath Ver 2.0 I having problem with Incoming Trunk Call if I forwarded my no 2001 to 2002 then incoming Trunk call not landing 2001. Distand end get busy tone or silense. If I remove forwarding call get landing on 2001. We are using approx 10 PRI trunk. Call not landing from all trunk when number is forwarded.please help me
 

Ramesh ji

Seems you are indian.. Please share the Cot COP COss of TRunk and extension.



Regards
Hello ,You can dicuss with me for Hipath 3k and Hipath 4K
 
hi Ramesh Lal

when you activate forword you should use GEN (all calls)
ADD-ZIEL:FWD,2001,VCE,2002,,CFU,GEN,STATION;

best regards
 
YOU NEED TO ADD IN ACTDA THE FORWRDIGN LOCALS
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top