Hi, Does anyone know how to get

[bahija]

Hi,

Does anyone know how to get in to a 3com office connect Remote 510s Router ISDN when the password has been lost.

It does not matter if all the old config is lost as long as I can get in to it to set it up
Many thanks

 

[zon]

You are able to reset the password, however you were right on your assumptions of losing all configurations.

To reset your password, proceed by powering on the Office Connect Remote 510 unit with the reset button depressed, and then release after the lights have flashed.
On the terminal screen the following text will be displayed:

------------------
OCR BOOT x
(c) 3Com-Sonix

After a short while the following text will appear on the terminal screen:

------------------
OCR BOOT x
(c) 3Com-Sonix
------------------
All Tests Passed
Press for Loader

At this moment the reset button has to be pressed again (and released). If this is done on the right moment, the following text will appear on the terminal screen:

------------------
OCR BOOT x
(c) 3Com-Sonix
------------------
All Tests Passed
Press for Loader
------------------
Loading ...
------------------
OCR LOAD x
(c) 3Com-Sonix

After pressing the ENTER key on the terminal keyboard, the following menu will appear on the terminal screen:

OCR LOAD x

1. Remote Load Code
2. Remote Load Boot
3. Remote Load Data
4. Erase Data
5. Cancel

Choose option Erase Data.

This means that the configuration, including the password, is being erased now.
The Office Connect Remote 5xx unit has to be powered off and on and should be accessible again with the default password: PASSWORD (case sensitive!).

*Knowledge bases are a good place to begin searching through.*

Hope it helps.

Zon
To the future.