Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Hi All I'm trying to connect a exte

Status
Not open for further replies.

rcr3530

Technical User
Jun 14, 2006
62
US
Hi All I'm trying to connect a external speaker for paging but I can find the pair where is suppouse to be connected. Have any one know the pair color and if need an amplifier in between the system and the speaker.

Thanks
 
Whay system are you working with?

We all need a little help once in awhile. Tony the Phoneman..
 
Paging Audio is on the Violet Orange pair, Paging Contact Closure is on the Violet Green, Aux Ringer Violet Brown and Music on Hold is on the Violet Slate.

Hope that helps.
 
If you're using a self-amplified speaker (24v input and tip/ring input on horn), then just cross connect the page pair to the tip/ring of the horn.

If you're using 70v horns, then you will need an amp, and the page pair connects to the page in on the amp.
 
Look at:
faq799-2063 faq799-1797

----------------------------
JerryReeve
Communications Systems Int'l
com-sys.com

 
Hi all thanks for the help, I was missing the power supply
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top