HELP 1

[luly]

I get conflict in LAN whenever the WT11 (Wireless Ethernet Bridge) is up. The WT11 is connected to a printer and link to an access point WAP11. Pls...any idea of the reason of this problem? thanks

 

[bcastner]

The conflict is in the IP addresses being given.

Disable DHCP on the WAP11, let it pull addresses from whatever DHCP server sits behind it.

Give the WAP11 a non-conflicting (with the DHCP, but same subnet) a static address. Say, 182.168.1.9
Do the same for the print server, but a different static IP: say 192.168.1.8

Reboot all devices, starting with the router; then the WAP11, then the print device.

 

[luly]

Thank u for the suggetion, it worked changing the channel in the access point.