I have a multi node private network (NO ESN IS IN USE ON TIE ROUTES) involving:
a)81c hub and
b)12 opt11c satilites,
c)the hub has pri's to PSTN and
D) each satilite has a pri to the hub (single route tie lines).
E)i have call pilot at the hub,
WORKING ARANGEMENT-
D.I.D CALLS FROM PSTN ARE ROUTED THRU HUB VIA CDP TO ANY STATION IN NETWORK , HUB OR SATILITE. THOSE CALLS CAN BE FORWARDED OR TRANSFERED OR CONFERENCED TO ANY OTHER STATION IN THE NETWORK,INCLUDING CALL PILOT, THIS WORKS FINE,
THE HUB (81C) HAS TRUNK TO TRUNK RESTRICTIONS AND TRUNK BARRING SETUP VIA NET(LD 15)FTOP=FTTB AND TRUNK BARRING IS SETUP FOR THE EXTENAL ROUTES,DID,CO.THIS WORKS FINE, NO UNSUPERVISED TRANSFER OR CONFERENCE CAN BE MADE INVOLVING EXTERNAL TRUNKS AND THERE ARE NO RESTRICTIONS TO THE SATILITES AS FAR AS TRANSFER, FORWARDING OR CONFERENCE INVOLVING CDP CALLS.CAN UNRESTRICT BY CHANGING STATION CLS TO FTTU.
ALL SATILITES ARE SET FOR IN NET (LD15)
FOR TRNX=YES AND EXTT=YES, FTOP=FRES, AND STATION CLS SET FOR FTTC. WITH NO TRUNK BARRING CONFIGURED.
I'M AM UNABLE TO USE TRUNK BARRING OR FLEXABLE TRUNK TO TRUNK RETRICTIONS ON MY SATILITE OPT11Cs AS IT INTERFERES WITH THE CDP CALLS.
I CANNOT BREAKDOWN THE TIE LINES (PRI'S)INTO MULTIPLE ROUTE BECAUSE OF TRAFFIC ISSUES,
CAN ANYONE OFFER A SOLUTION?
thanks
a)81c hub and
b)12 opt11c satilites,
c)the hub has pri's to PSTN and
D) each satilite has a pri to the hub (single route tie lines).
E)i have call pilot at the hub,
WORKING ARANGEMENT-
D.I.D CALLS FROM PSTN ARE ROUTED THRU HUB VIA CDP TO ANY STATION IN NETWORK , HUB OR SATILITE. THOSE CALLS CAN BE FORWARDED OR TRANSFERED OR CONFERENCED TO ANY OTHER STATION IN THE NETWORK,INCLUDING CALL PILOT, THIS WORKS FINE,
THE HUB (81C) HAS TRUNK TO TRUNK RESTRICTIONS AND TRUNK BARRING SETUP VIA NET(LD 15)FTOP=FTTB AND TRUNK BARRING IS SETUP FOR THE EXTENAL ROUTES,DID,CO.THIS WORKS FINE, NO UNSUPERVISED TRANSFER OR CONFERENCE CAN BE MADE INVOLVING EXTERNAL TRUNKS AND THERE ARE NO RESTRICTIONS TO THE SATILITES AS FAR AS TRANSFER, FORWARDING OR CONFERENCE INVOLVING CDP CALLS.CAN UNRESTRICT BY CHANGING STATION CLS TO FTTU.
ALL SATILITES ARE SET FOR IN NET (LD15)
FOR TRNX=YES AND EXTT=YES, FTOP=FRES, AND STATION CLS SET FOR FTTC. WITH NO TRUNK BARRING CONFIGURED.
I'M AM UNABLE TO USE TRUNK BARRING OR FLEXABLE TRUNK TO TRUNK RETRICTIONS ON MY SATILITE OPT11Cs AS IT INTERFERES WITH THE CDP CALLS.
I CANNOT BREAKDOWN THE TIE LINES (PRI'S)INTO MULTIPLE ROUTE BECAUSE OF TRAFFIC ISSUES,
CAN ANYONE OFFER A SOLUTION?
thanks