Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

help with static route please

Status
Not open for further replies.

bickyatbickyz

Technical User
Nov 9, 2007
29
GB
Hi this is my network
301kayv.jpg


STATIC ROUTE on ROUTER A
RouterA#sh ip route
Codes: C - connected, S - static, I - IGRP, R - RIP, M - mobile, B - BGP
D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
E1 - OSPF external type 1, E2 - OSPF external type 2, E - EGP
i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, ia - IS-IS inter area
* - candidate default, U - per-user static route, o - ODR
P - periodic downloaded static route

Gateway of last resort is not set

C 10.0.0.0/8 is directly connected, Serial0/0
S 193.168.1.0/24 [1/0] via 10.1.1.1
C 193.168.2.0/24 is directly connected, FastEthernet0/0
RouterA#


STATIC ROUTE on ROUTER B
RouterB#sh ip route
Codes: C - connected, S - static, I - IGRP, R - RIP, M - mobile, B - BGP
D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
E1 - OSPF external type 1, E2 - OSPF external type 2, E - EGP
i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, ia - IS-IS inter area
* - candidate default, U - per-user static route, o - ODR
P - periodic downloaded static route

Gateway of last resort is not set

C 10.0.0.0/8 is directly connected, Serial0/0
C 193.168.1.0/24 is directly connected, FastEthernet0/0
S 193.168.2.0/24 [1/0] via 10.1.1.2
RouterB#

I dont understand why i cannot ping from PC0 to PC1?
Ping PC0 to Router A - success
Ping Router A to Router B - success
Ping PC1 to Router B - success
 
Make sure the PC have the right default-gateway.Also if your'e using Win XP make sure it's not the Firewall.
Regards
 
Is there any connection to the internet? If so, you may be duplicating addresses with 193.168.x.x
You probably want 192.168.x.x, but if there is no connection to the internet, then that's ok. Post a sh run from both routers, also.

Burt
 
you have your static routes backwards, also why dont you use routing protocols
 
Hello Eliyzfr600
Take another look the the diagram and conf.The static's are correct.
Regards
 
thank u "Minue", i forgot to put default gateway.
Now PC0 can successfully ping PC1

and thanks to others who contributed their views.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top