help with static route please

[bickyatbickyz]

Hi this is my network

STATIC ROUTE on ROUTER A
RouterA#sh ip route
Codes: C - connected, S - static, I - IGRP, R - RIP, M - mobile, B - BGP
D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
E1 - OSPF external type 1, E2 - OSPF external type 2, E - EGP
i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, ia - IS-IS inter area
* - candidate default, U - per-user static route, o - ODR
P - periodic downloaded static route

Gateway of last resort is not set

C 10.0.0.0/8 is directly connected, Serial0/0
S 193.168.1.0/24 [1/0] via 10.1.1.1
C 193.168.2.0/24 is directly connected, FastEthernet0/0
RouterA#


STATIC ROUTE on ROUTER B
RouterB#sh ip route
Codes: C - connected, S - static, I - IGRP, R - RIP, M - mobile, B - BGP
D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
E1 - OSPF external type 1, E2 - OSPF external type 2, E - EGP
i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, ia - IS-IS inter area
* - candidate default, U - per-user static route, o - ODR
P - periodic downloaded static route

Gateway of last resort is not set

C 10.0.0.0/8 is directly connected, Serial0/0
C 193.168.1.0/24 is directly connected, FastEthernet0/0
S 193.168.2.0/24 [1/0] via 10.1.1.2
RouterB#

I dont understand why i cannot ping from PC0 to PC1?
Ping PC0 to Router A - success
Ping Router A to Router B - success
Ping PC1 to Router B - success

 

[Minue]

Make sure the PC have the right default-gateway.Also if your'e using Win XP make sure it's not the Firewall.
Regards

 

[burtsbees]

Is there any connection to the internet? If so, you may be duplicating addresses with 193.168.x.x
You probably want 192.168.x.x, but if there is no connection to the internet, then that's ok. Post a sh run from both routers, also.

Burt

 

[eliyzfr600]

you have your static routes backwards, also why dont you use routing protocols

 

[Minue]

Hello Eliyzfr600
Take another look the the diagram and conf.The static's are correct.
Regards

 

[bickyatbickyz]

thank u "Minue", i forgot to put default gateway.
Now PC0 can successfully ping PC1

and thanks to others who contributed their views.