Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Help with selective printing

Status
Not open for further replies.

Versaiteis

Programmer
Aug 7, 2009
1
US
Well what I need to be able to do is to print half of a design in CorelDraw x4 and then print the other half separately, without having anything move.

I could put a white square and remove the stroke line on it, the only problem is that these designs need to be printed onto clear plastic paper
 
Are you printing the two halves on different sheets, to get a final result that is twice the size of each sheet?

If so, one answer is "tiled output" which you can select at print time.

Printing on clear plastic paper makes very little difference so far as CorelDraw is concerned, except that the white of your background and any white objects you place on it will be transparent rather than white. Except possibly if you have a special printer with white ink in it, but that would be pretty unusual.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top