Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Help with Pix 515 telnet issue
- Thread starter 1491
- Start date
This the the command that I used:
telnet 192.168.0.133 255.255.255.255 inside
so that only my system can telnet to the PIX. So the only difference in our commands is the subnet mask. If you are just looking to only allow your system to telnet to the PIX use 255.255.255.255 for the netmask...that specifies just that system. You can use that command for multiple single IPs.
telnet 192.168.0.133 255.255.255.255 inside
so that only my system can telnet to the PIX. So the only difference in our commands is the subnet mask. If you are just looking to only allow your system to telnet to the PIX use 255.255.255.255 for the netmask...that specifies just that system. You can use that command for multiple single IPs.
- Status
Similar threads
- Locked
- Question
- Locked
- Question