Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Help with NS1000
- Thread starter ingy500
- Start date
I tested it in our labs and you can't restore old backup into NS500 which is a member of One-Look network ![[cry]](/data/assets/smilies/cry.gif "[cry] [cry]")
But you can export data from the old backup and import it into NS1000 ( Mainetenance / Tool/ 7. Export and 6. Import )
That's most of the data, and the rest you have to manually set
Important:
- NS500 must hold IP address
- SIP-EXT and IP-PT cards must be OUS
- NS1000 must be empty (without any cards)
- NS1000 must have the same numbering plan
- register new IP phone to IP sddress of NS1000
- backup old OGM messeges and upload it into NS1000
There are no stupid questions, there are only stupid answers!
But you can export data from the old backup and import it into NS1000 ( Mainetenance / Tool/ 7. Export and 6. Import )
That's most of the data, and the rest you have to manually set
Important:
- NS500 must hold IP address
- SIP-EXT and IP-PT cards must be OUS
- NS1000 must be empty (without any cards)
- NS1000 must have the same numbering plan
- register new IP phone to IP sddress of NS1000
- backup old OGM messeges and upload it into NS1000
There are no stupid questions, there are only stupid answers!
- Thread starter
- #3
Ok
In the current situation 50 ip phones in ns500 but after change to slave
Then run ns1000 with DSP ns0111 128 ip / ns500 with DSP ns5111 128 ip..
How is programming done?
50 ip phones to ip pbx ns500 192.168.1.110
170 ip phones to pbx ns1000 192.168.1.210
220 will work ip phones
+ Recording all pbxs ns500 and ns1000 + PRI 30 in ns500
Can you give an example of how the step by step works?
In the current situation 50 ip phones in ns500 but after change to slave
Then run ns1000 with DSP ns0111 128 ip / ns500 with DSP ns5111 128 ip..
How is programming done?
50 ip phones to ip pbx ns500 192.168.1.110
170 ip phones to pbx ns1000 192.168.1.210
220 will work ip phones
+ Recording all pbxs ns500 and ns1000 + PRI 30 in ns500
Can you give an example of how the step by step works?
- Status
