Help with MD110 MDN

[Niroshan]

Hi,

I am new to MD110. Currently there is a MDN xxxx setup and there are 4 extensions associated with it. When we ring the MDN ext it allways tragets the same extension. Is there a way to force it to jump in turns or change it to different extension

<KSMDP:mdn=7100;
KEY SYSTEM MULTIPLE DIRECTORY NUMBER DATA
MDN DIR KEY CALALT
7455 *7100 - -
7000 14 2
7001 14 2
7002 14 1

When we ring it always picks 7002 is there a way to change it.

Thanks in advance

 

[Monrovia]

Hi niroshan,
it is because, the calalt =1 for 7002, and other extns is 2.

if u want to ring it in all these extns simultaneously change calalt = 1 for all, or select accordingly. (wherever calalt=1, it will ring)

or if u want to ring 7455 in another extn other than these 4, use pelpi on 7455 to ring on the required extension, and change the calalt on 7002 & others to 2.

b.r

monro

 

[Niroshan]

Hi Monro,

Thanks heaps for your prompt response.

Can you please let me know how I can change the calalt to 2 for all of them. If you can suggest some command would be much appriciated.

Cheers Niro

 

[Monrovia]

hi niro,

KSMDEIR=7100&7000&7001,MDN=7455;
MSMDIIR=7100,KEY=14,MDN=7455,CALALT=1;
MSMDIIR=7000,KEY=14,MDN=7455,CALALT=1;
MSMDIIR=7001,KEY=14,MDN=7455,CALALT=1;

B.R
Monro

 

[Niroshan]

Hi Monro,

I tried the below but had no luck,
KSMDIIR=7402,KEY=14,MDN=7455,CALALT=2;
Error was

NOT ACCEPTED KEY NOT TNS

Then I tried
KSMDEIR=7402,MDN=7455
Error was
NOT ACCEPTED
KEY NOT MDN

KSFKPIR=7402;

Returned

<KSFKP:dir=7402;
KEY SYSTEM FUNCTION KEY DATA PRINT

DIR = 7402
KEY KTYPE VALUE DIG
00 PGM
04 SKI F1
05 SKI F2
06 SKI F3
07 SKI F4
08 SKI MENU
09 ODN 7402
10 ODN 7402
11 ODN 7402
12 FCN CAD
13 FCN TNS A22B00419168483B
14 MNS 7455 7455
15 FCN TNS
16 MDN 7412
17 MDN 7464
18 FCN ODN2
19 FCN TNS 0043xxx xxx
20 ADN 7466
21 FCN TNS
22 FCN TNS
23 FCN TNS
24 FCN MEW

END

Tried
<ksfkc:dir=7402,key=14,fcn=tns;
NOT ACCEPTED
FCN
NOT IN RANGE

Not sure what I am doing wrong. This is pretty new to me appriciate your assistance.

 

[Niroshan]

Hi Monro,

Thanks for the response.

When I tried below error came up..

<ksmde:dir=7430,mdn=7455;
NOT ACCEPTED
KEY NOT MDN
<
TIME OUT WARNING

 

[mgrada]

Hi niroshan, before you can delete MDN, you need to delete the mns funciotn on it (it's the function that permit the click and dial), the command chain should be something like this:

KSFKCIR=7402,KEY=14,FCN=MDN;
KSMDEIR=7402,MDN=7430;

After this command the keys it will be free, so you can reprogram MDN with the correct CALALT.

KSMDIIR=7402,KEY=14,MDN=7455,CALALT=1;

the remebber to re-enable the click to dial function with command

KSFKCIR=7402,KEY=14,FCN=MNS,DIG=7402;

all this command are valid for a BC9 System, for newer version it's a little bit different.

Bye
Mirko