subliminal36
Technical User
Does anyone know how to develope a grid for use in a map in AutoCAD? this is driving me crazy!?!?!
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Help with grid building?
- Thread starter subliminal36
- Start date
- Status
well, what kinda grid are you talking about, just your basic
straight lines up and down, if so there is no real way to do
it, you just gotta draw one line, and then the best thing to
do is offset the distance as many times as you need then its
the same in the other direction... For a 3d one to go up and
down over contours, I would suggest a Mesh, the command line
is '3dmesh' its kinda hard to get used to it but it does the job.
If this doesnt help then tell me exactly what is it you want
to draw. And what version of CAD you are using.
And by the way have you considered AcadMAP. Pretty useful!!!
Jay~
If its broken, just leave it and hope someone else fixs it!
~KeyTech
straight lines up and down, if so there is no real way to do
it, you just gotta draw one line, and then the best thing to
do is offset the distance as many times as you need then its
the same in the other direction... For a 3d one to go up and
down over contours, I would suggest a Mesh, the command line
is '3dmesh' its kinda hard to get used to it but it does the job.
If this doesnt help then tell me exactly what is it you want
to draw. And what version of CAD you are using.
And by the way have you considered AcadMAP. Pretty useful!!!
Jay~
If its broken, just leave it and hope someone else fixs it!
~KeyTech
- Thread starter
- #3
subliminal36
Technical User
I'm using CAD 2000. Basically yeah, just your square grid. 500 by 500 to be exact. How would I go about using AutoMAP?
- Thread starter
- #4
subliminal36
Technical User
I'm using CAD 2000. Basically yeah, just your square grid. 500 by 500 to be exact. How would I go about using AutoMAP? The other question I have is: This thing has to be in long/ lat coordinates and streach from Denver to Chicago, any suggestions here? Thanx for your help by the way, much appreciated.
SUB
SUB
eh first off I live in Ireland and I havent a clue how far
it is from Denver to Chicago! But I presume its pretty far!!
ACADmap is another product by Autodesk, and it sits ontop
of ACAD2000 to work. Its pretty simple to use, but will
cost a bit, if you are in work try and get your boss to buy
it for you, it is well worth it. Especially if you are doing
alot of maps and stuff..check out these url's
There is no quick way of doing it in CAD2000, just draw one
line 500 and then offset it down by the distance between each
lat/long. Copy the lines to a different part of the page
and then rotate the new lines and place them onto the
original lines creating a 500 x 500 grid! thats how I would
go about doing it!! but try and get acadMap, well worth it!
Jay~
If its broken, just leave it and hope someone else fixes it!
~KeyTech
it is from Denver to Chicago! But I presume its pretty far!!
ACADmap is another product by Autodesk, and it sits ontop
of ACAD2000 to work. Its pretty simple to use, but will
cost a bit, if you are in work try and get your boss to buy
it for you, it is well worth it. Especially if you are doing
alot of maps and stuff..check out these url's
There is no quick way of doing it in CAD2000, just draw one
line 500 and then offset it down by the distance between each
lat/long. Copy the lines to a different part of the page
and then rotate the new lines and place them onto the
original lines creating a 500 x 500 grid! thats how I would
go about doing it!! but try and get acadMap, well worth it!
Jay~
If its broken, just leave it and hope someone else fixes it!
~KeyTech
- Thread starter
- #6
subliminal36
Technical User
thanks a lot Key Tech, your information is very appreciated.
Tim
Tim
- Status
Similar threads
- Locked
- Question