Hi,
I would like some suggestions about how to do the following:
Cisco801 (LAN: 172.26.1.0, WAN: 172.31.19.2) which is dialed by the following equipment.
Cisco2611 (LAN: 10.65.24.189, WAN: 172.31.19.1)
Cisco760 (LAN: 192.168.6.5, WAN: 172.31.19.3)
Windows2K Dial-up connection (172.26.1.100 when connected to the 801)
2611 & 760 is always dialing from the same place, but the Windows2K laptop could be dialing from anywhere.
any ideas?
I would like some suggestions about how to do the following:
Cisco801 (LAN: 172.26.1.0, WAN: 172.31.19.2) which is dialed by the following equipment.
Cisco2611 (LAN: 10.65.24.189, WAN: 172.31.19.1)
Cisco760 (LAN: 192.168.6.5, WAN: 172.31.19.3)
Windows2K Dial-up connection (172.26.1.100 when connected to the 801)
2611 & 760 is always dialing from the same place, but the Windows2K laptop could be dialing from anywhere.
any ideas?