Help with Call Pilot MINI and MICS 8x32 1

[vdenchik]

I got MICS 8x32 ver6.0 and CallPilot Mini VM
I've been reading docs on how to configure and got the general idea thanx to gurus on this forum. But Now I have trouble configuring VM to induvidual mailboxes.
Call Pilot TCM 1 thru 4 have been punched into the first 4 ports on the MICS. All the Mailboxes have been created onm the VM. The mailbox numbers are exactly the same as the port numbers of the phones they assigned to. I do not understand how to program this in a way where each phone when busy will automatically got to the specific mailbox.
I use NRU 10 for programing.
Thanx.

 

[stemplin]

I am assuming that when you say the mbox numbers match the port numbers on the MICS that you actually mean the DN or extension number. If so, then each set under capabilities has a setting for forward no answer and forward busy. That would need to be set to the first DN that the Call Pilot is punched to. That should be all you have to do and the Call Pilot will know what extension is calling and direct to the correct mailbox.

Hope this helps,
Scott Templin

 

[vdenchik]

Thanks a lot Scott, I figured it out before I checked this but I gave u a star anyway cause thats exactly right. I was traying to assign an extention to it, but it would say that it was wrong, and then I tried the first port and it worked.
Thnax,
~V