HELP WITH BREAKING SITE CONNECTORS

[JNAINC]

We just built a new exchange server (5.5) moved the mailboxs from old to new. Now the old server acts as a bridge to the new server. How do we break that link so we only have one server running instead of two?

Thank you.

 

[it4bwk]

find the connection in all servers involved...

you will have to remove the connectors to the old site, recalculate routing, re-establish the site connectors with the new exchange server and the existing sites. recalc routing again...

If I understand your problem then that should work for ya...

Jerry

 

[JNAINC]

Thank you for your reply....how do we do what you described?

 

[it4bwk]

thru the exchange administrator tool which should have loaded with Exchange on the server, then within each site's "connections" container you should see the site connectors listed.....

make sure you have IP and Netbios name resolution to and from all servers involved...

 

[it4bwk]

you will also need to have admin rights on all servers involved with the connectors...