We got in our company Avaya IP Office 500 kit: Control Unit, VCM 32, the card base analog for analog phone lines, and two trunk card-ATM4 (analog trunk ports) Dual BRI (ISDN base for two lines). The set contains a few 1608 IP phone and one 1616. Now, all this I have to set to function properly. Everything is installed, I inserted the key feature, there are one ISDN line to pstn, I set a few users and logged on the phones (I put address of IP office in phones as ip of file servers and put al the phones in a switch, and in the lan1 of IP 500). All this good work in local, but I have no output to the PSTN. I need help about the following things: how to set IP 500 to have out to pstn for example when I press 9 (to get the tone of PSTN networks), what for short codes are using for, what is ASR, how to redirect incoming calls to a certail Ext,... I found some user's guides, but it would great if someone has a manual with examples or something for begginers, or have a little time for few advices ... I've never worked with IP telephone systems, I am still studying SIP, H.323 and other stuffs, but I would appreciate any help in at least this basic setup.
Sincerely,
Dejan
Sincerely,
Dejan