In syslog and on the screen we are receiving a notice of "NOTICE: Sdsk: Spurious interrupt". This supposedly is related to a software interrupt not being handled. The question is how do I fix this! The server is a Sco OpenServer 5.0.6 that was configured by a 3rd parth vendor of ours for their application that we run. Now this box was sent to use with irq conflicts. Here is the output from a 'hwconfig -ch':
device address vec dma comment
====== ======= === === =======
kernel - - - rel=3.2v5.0.6 kid=2000-07-27
cpu - - - unit=1 family=6 type=gt PentIII
cpuid - - - unit=1 vend=GenuineIntel tfms=0:6:10:1(3)
fpu - 13 - unit=1 type=80387-compatible
pci 0xcf8-0xcff - - am=1 sc=1 buses=7
PnP - - - nodes=0
clock - - - type=TSC/699148989Hz
serial 0x3f8-0x3ff 4 - unit=0 type=Standard nports=1 fifo=yes
serial 0x2f8-0x2ff 3 - unit=1 type=Standard nports=1 fifo=yes
console - - - unit=vga type=0 num=12 scoansi=1 scroll=50
adapter 0x2000-0x20ff 11 - type=blad ha=0 bus=0 id=7 fts=sto
adapter 0x2100-0x21ff 11 - type=blad ha=1 bus=0 id=7 fts=sto
floppy 0x3f2-0x3f7 6 2 unit=0 type=135ds18
kbmouse 0x60-0x64 12 - type=Keyboard|PS/2 mouse id=0x00
adapter 0x1f0-0x1f7 14 - type=IDE ctlr=primary dvr=wd
ipsraid - 11 - type=ips ha=0 id=15 fts=sd v4.50.05
pnt 0x2200-0x2212 9 - pnt0 Ver: 4.02 addr=00:06:29:55:2e:73
e3H 0x2280-0x22ff 10 - 3Com 3c90x/3c980, unit=0
e3H 0x2300-0x237f 9 - 3Com 3c90x/3c980, unit=1
cd-rom - - - type=IDE ctlr=pri cfg=mst dvr=Srom->wd
tape - - - type=S ha=1 id=6 lun=0 bus=0 ht=blad
disk - - - type=S ha=0 id=0 lun=0 bus=0 ht=ips
Sdsk - - - cyls=4442 hds=254 secs=63 fts=stdb
*** There may be an interrupt conflict on interrupt vector 9
*** There may be an interrupt conflict on interrupt vector 11
The Sdsk which the error complains about has no assigned IRQ. Anyone have any ideas to throw out to me?
Thanks in advance.
device address vec dma comment
====== ======= === === =======
kernel - - - rel=3.2v5.0.6 kid=2000-07-27
cpu - - - unit=1 family=6 type=gt PentIII
cpuid - - - unit=1 vend=GenuineIntel tfms=0:6:10:1(3)
fpu - 13 - unit=1 type=80387-compatible
pci 0xcf8-0xcff - - am=1 sc=1 buses=7
PnP - - - nodes=0
clock - - - type=TSC/699148989Hz
serial 0x3f8-0x3ff 4 - unit=0 type=Standard nports=1 fifo=yes
serial 0x2f8-0x2ff 3 - unit=1 type=Standard nports=1 fifo=yes
console - - - unit=vga type=0 num=12 scoansi=1 scroll=50
adapter 0x2000-0x20ff 11 - type=blad ha=0 bus=0 id=7 fts=sto
adapter 0x2100-0x21ff 11 - type=blad ha=1 bus=0 id=7 fts=sto
floppy 0x3f2-0x3f7 6 2 unit=0 type=135ds18
kbmouse 0x60-0x64 12 - type=Keyboard|PS/2 mouse id=0x00
adapter 0x1f0-0x1f7 14 - type=IDE ctlr=primary dvr=wd
ipsraid - 11 - type=ips ha=0 id=15 fts=sd v4.50.05
pnt 0x2200-0x2212 9 - pnt0 Ver: 4.02 addr=00:06:29:55:2e:73
e3H 0x2280-0x22ff 10 - 3Com 3c90x/3c980, unit=0
e3H 0x2300-0x237f 9 - 3Com 3c90x/3c980, unit=1
cd-rom - - - type=IDE ctlr=pri cfg=mst dvr=Srom->wd
tape - - - type=S ha=1 id=6 lun=0 bus=0 ht=blad
disk - - - type=S ha=0 id=0 lun=0 bus=0 ht=ips
Sdsk - - - cyls=4442 hds=254 secs=63 fts=stdb
*** There may be an interrupt conflict on interrupt vector 9
*** There may be an interrupt conflict on interrupt vector 11
The Sdsk which the error complains about has no assigned IRQ. Anyone have any ideas to throw out to me?
Thanks in advance.