Help - Removed board but config remains 1

[tricky105]

We've removed an announcement board but the config is still in place.

If I do an list conf board 02e09 - it says no board but the board type is still announcement & there are errors showing.

Please help.

 

[wilsontec]

have you delete all extension in "change announcement" field on the location board.

 

[GuzaPasha]

Hi,

remove all translation assigned to this board, ann, data modules(if you have VAL)

if it remains in the config, try the following command change circuit

try to clear board information

GuzaPasha

 

[tricky105]

Thanks Guy's the change circuit command has resolved the issue.