help -- problem same dn in 3 phone

[canijomxli]

I have the following table

a- extesnion key 0 scr 1611 digital
b- extension key 0 scr 1611 digital
c-1611 analog extension


the problem is that if any of the 3 talking extension

any other and can mess up the conversation


question ---


can be made if any of the three that occupies, the other two can not access it ??


thank you

good day

 

[gwebster]

What you want is a multiple call ringing configuration between the analog and digital phones. Start by removing the key 0 SCR appearances on the two digital stes. Then configure the analog set with CLS MCRA. Then add the key 0 appearances back on the two digital sets as MCR keys.

 

[canijomxli]

and thereby to raise the headphones and not go into the conversation?

thank you

 

[gwebster]

By default, any mixed configuration of digital/IP sets and analog sets results in a Single Call Ringing (SCR) configuration - which results in only a SINGLE call being able to be made.

A Multiple Call Ringing (MCR) configuration (as provisioned in my previous post) provides privacy between the parties. Extension "a" is in a conversation with another party. If either extension "b" or extension "c" goes offhook, they will NOT be automatically connected into that conversation.

 

[canijomxli]

thank you very much for your help
really valuable forum