HELP ! PIX is not allowing multiple VPN remote connections

[Tsmith01]

I have a PIX 506 E. I got the VPN working. However, it does not allow multiple VPN remote connections. It's only allowing one connection. Does anyone have an idea of what could be the problem? I found out that this PIX can handle up to 25 connections.
Please help me..

 

[NetworkGhost]

Post the config. Make sure you only use 1 crypto map for the tunnels and use different sequence numbers for each tunnel.

 

[Tsmith01]

Thanks for your response NetworkGhost. Here is my config.
Please let me know if you see anything wrong with it.
PIX Version 6.3(4)
interface ethernet0 auto
interface ethernet1 auto
nameif ethernet0 outside security0
nameif ethernet1 inside security100
enable password 8Ry2YjIyt7RRXU24 encrypted
passwd 2KFQnbNIdI.2KYOU encrypted
hostname stjoseph
domain-name cisco.pix.stjoseph
fixup protocol dns maximum-length 512
fixup protocol ftp 21
fixup protocol h323 h225 1720
fixup protocol h323 ras 1718-1719
fixup protocol http 80
fixup protocol rsh 514
fixup protocol rtsp 554
fixup protocol sip 5060
fixup protocol sip udp 5060
fixup protocol skinny 2000
fixup protocol smtp 25
fixup protocol sqlnet 1521
fixup protocol tftp 69
names
access-list outside_access_in permit icmp any any
access-list outside_access_in permit tcp any host 71.31.127.158 eq 3389
access-list outside_access_in permit ip any any
access-list outside_inbound_nat0_acl permit ip any host 10.0.17.240
access-list inside_outbound_nat0_acl permit ip any 10.0.17.128 255.255.255.128
access-list inside_outbound_nat0_acl permit ip any 10.0.17.0 255.255.255.128
access-list outside_cryptomap_dyn_20 permit ip any 10.0.17.0 255.255.255.128
pager lines 24
mtu outside 1500
mtu inside 1500
ip address outside pppoe setroute
ip address inside 10.0.17.254 255.255.255.0
ip audit info action alarm
ip audit attack action alarm
ip local pool VPNPOOL 10.0.17.50-10.0.17.100
pdm location 10.0.17.2 255.255.255.255 inside
pdm location 10.0.17.240 255.255.255.255 inside
pdm location 10.0.17.127 255.255.255.255 inside
pdm location 10.0.17.128 255.255.255.128 outside
pdm history enable
arp timeout 14400
global (outside) 10 interface
global (outside) 2 71.31.127.158
nat (outside) 0 access-list outside_inbound_nat0_acl outside
nat (inside) 0 access-list inside_outbound_nat0_acl
nat (inside) 10 0.0.0.0 0.0.0.0 0 0
static (inside,outside) 71.31.127.158 10.0.17.240 netmask 255.255.255.255 0 0
access-group outside_access_in in interface outside
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 rpc 0:10:00 h225 1:00:00
timeout h323 0:05:00 mgcp 0:05:00 sip 0:30:00 sip_media 0:02:00
timeout uauth 0:05:00 absolute
aaa-server TACACS+ protocol tacacs+
aaa-server TACACS+ max-failed-attempts 3
aaa-server TACACS+ deadtime 10
aaa-server RADIUS protocol radius
aaa-server RADIUS max-failed-attempts 3
aaa-server RADIUS deadtime 10
aaa-server LOCAL protocol local
http server enable
http 10.0.17.2 255.255.255.255 inside
http 10.0.17.127 255.255.255.255 inside
no snmp-server location
no snmp-server contact
snmp-server community public
no snmp-server enable traps
floodguard enable
sysopt connection permit-ipsec
crypto ipsec transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac
crypto ipsec transform-set ESP-DES-MD5 esp-des esp-md5-hmac
crypto dynamic-map outside_dyn_map 20 match address outside_cryptomap_dyn_20
crypto dynamic-map outside_dyn_map 20 set transform-set ESP-DES-MD5
crypto map outside_map 65535 ipsec-isakmp dynamic outside_dyn_map
crypto map outside_map interface outside
isakmp enable outside
isakmp enable inside
isakmp policy 20 authentication pre-share
isakmp policy 20 encryption des
isakmp policy 20 hash md5
isakmp policy 20 group 2
isakmp policy 20 lifetime 86400
vpngroup VPNusers address-pool VPNPOOL
vpngroup VPNusers dns-server 166.102.165.11 166.102.165.13
vpngroup VPNusers idle-time 1800
vpngroup VPNusers password ********
telnet 10.0.17.0 255.255.255.0 inside
telnet timeout 5
ssh timeout 5
console timeout 0
vpdn group pppoe_group request dialout pppoe
vpdn group pppoe_group localname saintjoseph
vpdn group pppoe_group ppp authentication pap
vpdn username saintjoseph password *********
vpdn username fernando password *********
vpdn username fer password *********
terminal width 80
Cryptochecksum:5924ef23059df65e1b3cc6cb144c4c2d
: end

 

[Tsmith01]

Guys,
Could you help me out on this issue. I would really appreciate it. I can't figure out why my PIX 506 will not handle multiple remote connections. It only allows one remote connection. I checked the configuration and I notice that I only have one crypto setup.. Could someone check the configuration above to see if there is something wrong with it.
Thanks

 

[NetworkGhost]

Ill answer this tonight. Have to head off to work right now. Sit tight.

 

[Tsmith01]

Thanks NetworkGhost ! I really appreciate all your assistance.