Help!!! P330 Multiple VLAN's

[kbrain]

How can I make a P333 route to multiple VLAN's? I have multiple VLAN's connected to the P333 and I need it to route out to multiple VLAN's. Does anyone know how to make this work?

 

[BuckWeet]

Well, do you have a P333R or an external router? You need to have some kind of Layer 3 device to do the routing.


BuckWeet

 

[kbrain]

IT's a P333T. Is it possible to configure the ports for different VLANS and have them pass that traffic thru the uplink ports back to the main router. In addition is it possible to have ports on the 333T configured for multiple VLAN's and have them pass the traffic between themselves.

 

[alimanzoor]

P333T can't do the routing so that means you should have to use an externel router with this. connecting with a router means assigning vlans with subnets and then connecting it to a router. If the both subnet are direct interface on router , then it doesnt need to router otherwise you have to do some routing as well.

You can have multiple VLANs on any of the ports but you can not pass one VLAN to the other if you haven't got any router or any toher layer 3 device.

Ali